This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.

Follow Us

Categories

Visaton Alto 1 - price per pair.

Visaton Alto 1 - price per pair.
Visaton Alto 1 - price per pair. Visaton Alto 1 - price per pair. Visaton Alto 1 - price per pair.
Product Code: 5966
Reward Points: 0
Availability: In Stock
Price: £179.06
Ex Tax: £149.22
   - OR -   
free delivery

The ALTO I is a 2-way shelf-mounted speaker with a cabinet volume of 13 litresCharacteristics and sound properties

The ALTO I is a 2-way shelf-mounted speaker with a cabinet volume of 13 litres. Apart from the 20 mm tweeter cone, the cabinet contains a 17 cm diameter mid-bass cone.

The sound qualities of the ALTO I are "warm" but with crisp, high-range reproduction.

This kit is ideally suited to replacing the more basic speakers often supplied as standard with low-priced hi-fi systems and thus improving the overall standard of the system.

Since the bass ports are at the front, the ALTO I can be hung on the wall or placed in bookshelves, facilitating good bass response even in rooms with difficult acoustics.

Accessories

Protective grille NG 6,5" for W 170 S 1 piece

Similar products

ALTO GENESIS SAT ALTO GENESIS SUB

ALTO II ALTO III C ALTO LINE EXPERIENCE V 20

STARLET

Construction

In order to simplify the cabinet construction as far as possible, we have done without the chamfers shown in the photo. If you prefer to include the all-round front chamfer, you will need the following information:

Angle: 30°

Width: 10 mm

The cabinet consists of boards stuck together (butt jointed), making construction a simple matter. First of all, the individual boards are cut to size (refer to cutting list), stuck together (butt jointed) as shown in the drawing and firmly clamped for the duration of the drying time using parcel tape. Once the cabinet has been completely built, the cut-outs are made for the speakers, bass tube and terminals using a jig-saw. The last job is the surface treatment, i.e. painting, veneering or adhesive film.

Inner damping

The damping of the speaker uses two mats of damping material pushed into the cabinet through the bass cut-out. To this end, the mats are folded once longways and once cross-ways and pushed into the cabinet in such a way that the space behind the bass tube remains free and the rest of the space inside the cabinet is loosely filled.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet. Cabinets and ready-made speaker can be ordered from www.vc-mailorderservice.de .

Tweeter: DT 94 8 Ohm 1 piece

Bass-midrange driver: W 170 S 4 Ohm 1 piece

Crossover: Crossover Alto I/II (with terminal, cables and plugs)

Bass reflex tube: BR 6.8 (full length) 2 pieces

Damping material: Polyester wool 1 bag

Wood screws: 3,5 x 19 mm 12 pieces ................

Cabinet parts list for 1 box

Parts Size (mm) Quantity

Material: 19 mm chipboard or MDF

Front and rear panel 342 x 192 2

Side panel 380 x 230 2

Top and bottom panel 230 x 192 2

 

Rated Power 60 Watt
Maximum power 100 watt
Impedance 4 Ohm
Sound pressure level -
Sensitivity -
Frequency response (-10 dB) 50-2000 Hz
Mean sound pressure level 83 dB(1 W/1m)
Max sound pressure level -
Maximum cone displacement -
Resonance frequency -
Magnetic induction -
Magnetic flux -
Height of front pole-plate -
Voice coil diameter -
Height of winding -
Cutout diameter -
Length of cable -
Net Weight -