Visaton SC 13 8 Ohm, 5 Inch, Magnetically Shielded Full Range Speaker
Product photo · Enlarge image
Product photo
Rear view and connections
Dimension drawing
Response and impedance
Directivity pattern
Product photographs and manufacturer drawings. Images are not to scale.
Quantity discounts
Buying in quantity?
Contact us with the quantity you need and we can discuss pricing for your order.
Request a quantity quoteDescription
The SC 13 pairs a cellulose cone with a rubber surround and is magnetically shielded, so it can work close to a screen; its even response lets it run full-range or as the low-midrange of a shielded two-way alongside the SC 10 N tweeter. This 8 Ω version takes 40 W rated power, gives 90 dB (1 W/1 m) and resonates at 78 Hz.
Typical applications
- Multimedia and computer speakers
- Shielded two-way speakers for surround systems
- Full-range and low-midrange use in multi-way systems
Full specifications
| Rated power | 40 W |
|---|---|
| Maximum power | 60 W |
| Nominal impedance | 8 Ω |
| Frequency response (−10 dB) | fu–13000 Hz (fu: lower cut-off depends on the cabinet) |
| Mean sound pressure level | 90 dB (1 W/1 m) |
| Opening angle (-6 dB) | 58°/4000 Hz |
| Excursion limit | ±7.5 mm |
| Resonance frequency fs | 78 Hz |
| Magnetic induction | 1 T |
| Magnetic flux | 250 µWb |
| Height of front pole-plate | 4 mm |
| Voice coil diameter | 20 mm |
| Height of winding | 5.5 mm |
| Cut-out | 113 mm |
| Net weight | 0.62 kg |
| D.C. resistance Rdc | 7.2 Ω |
| Mechanical Q factor Qms | 2.95 |
| Electrical Q factor Qes | 0.94 |
| Total Q factor Qts | 0.71 |
| Equivalent volume Vas | 7.4 l |
| Effective piston area Sd | 79 cm² |
| Dynamically moved mass Mms | 4.8 g |
| Force factor Bxl | 4.2 Tm |
| Inductance of the voice coil L | 0.7 mH |
| Terminals | 4.8 x 0.8 mm (+)/2.8 x 0.8 mm (-) |
| Temperature range | –25 to 70 °C |
Dimensions and drawings

Dimension drawing · Open original image
Installation and cabinet guidance
Allow a 113 mm panel opening. The frame is 131 mm square, with 5 x 7 mm fixing slots at the corners on a 145 mm circle; mark them from the driver itself rather than assuming the spacing. Behind the panel allow about 61 mm for the 113 mm basket and the 77.5 mm magnet, plus room for the terminals and the wiring.
Mount it on a rigid baffle with a continuous seal between the frame and the panel, and tighten the fixings evenly and only enough to seal so the frame is not distorted. With ±7.5 mm of travel available, check that the cone and the surround stay clear of any grille and of internal bracing at full excursion. Connect to the 4.8 x 0.8 mm (+)/2.8 x 0.8 mm (-) blade terminals with matching push-on connectors and observe polarity; the two blade widths identify it, and use an amplifier suitable for the 8 Ω load. The driver is magnetically shielded, so it can be used in multimedia and surround speakers close to a screen.
Visaton's published enclosure suggestions for this driver: 10 l closed (fc 103 Hz, Qtc 0.94); 20 l closed (fc 91 Hz, Qtc 0.83).
Related Products
Part no. 9046
Visaton W 165 A 2 Ohm, 6.5 Inch, Weatherproof Woofer
Part no. 2001
Visaton FRS 8 M 8 Ohm, 3.3 Inch, HiFi Full Range Speaker
Part no. 9089
Visaton M 10 8 Ohm, 4 Inch, HiFi Midrange Driver
Part no. 1055
Visaton WS 17 E 8 Ohm, 6.5 Inch, HiFi Woofer
Part no. 1054