Christmas Orders
Order placed after Thursday 19th December will be despatched when shipping resumes on Monday 6th January 2020

Visaton - Loudspeaker Kits & Accessories

Sort by:
Filter
Visaton Vox 301 - price per pair.

Visaton - Loudspeaker Kits & Accessories

£1,876.92 inc VAT
{"id":1676720308291,"title":"Visaton Vox 301 - price per pair.","handle":"visaton-vox-301-price-per-pair","description":"\u003cp\u003e\r\n\tThis is the largest of the Vox designs, employing a massive 12 inch bass driver along with high quality mid range and tweeter. This is a speaker for organ fans but also anyone who likes a large scale, dynamic sound which can really dig deep. VOX 301 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5915\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe VOX 301 extends the high-end VOX series upwards. While the mid-to-high-range is the same as in the VOX 253, the TIW 300 8 Ohm has been chosen as the woofer for this model. As a result, while the excellent characteristics experienced in the mid-to-high range remain the same, the level accuracy and dynamics in the bass department have been increased and the lower limiting frequency reduced to a remarkable 23 Hz. The VOX 301 can, therefore, be seen as the VOX variant for high-volume aficionados who like to hear concerts at close to the original sound levels in large rooms. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAt first sight, the construction of the VOX 301 looks complicated, which is why it is worth looking at each internal part individually first. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn the lower part of the cabinet, you can see the bass reflex tunnel, made up of the base and an upper board. In the middle, there are three cross-reinforcements to prevent resonance. At the top of the cabinet, behind the cut-out in the acoustic baffle for the mid- to high-range unit, is the enclosure required for the mid-range cone, made up of two wooden boards. Three 8 mm holes will have to be drilled in the rear wall of the mid-range chamber for the cables. They should not be drilled directly behind the driver because otherwise there will not be enough depth available for the wires behind the magnets. The holes must be well sealed afterwards. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFitting the TIW 300 into the side is a special feature. The mounting board for the TIW 300 (400 x 352 with a 289 mm cut-out) itself is glued in place from inside behind the square cut-outs in the corresponding side-wall. This means that the bass driver can be recessed by 19 mm (19 mm = thickness of the boards). For optical reasons, and to enable the cloth-covered frame to be fitted exactly in place, the side-wall cut-out must be made extremely accurately. The frame can be made from a 12 mm board. The outer dimensions of the frame should be exactly 1 mm smaller than the opening in the side-wall all round. In this way, the frame is jammed in place by the fabric used to cover it and alternative fixing methods (wooden plugs) are not necessary. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tTwo triangular reinforcing pieces are installed between the front panel and side walls to provide the required rigidity at the front despite the broad bevel. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe frequency crossover unit is mounted on the side-wall behind the bass cut-out. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe damping uses one mat placed in the medium range cabinet. The remainder is evenly distributed throughout the cabinet. The area above the tunnel opening (at the rear of the front panel) up to the lower edge of the reinforcement remains free. If, as a result of the acoustics in the room, the low-range bass is too powerful, damping this area will have a corresponding effect on the overall bass output level.\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:43:48+01:00","created_at":"2018-10-11T14:43:48+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":156410,"price_min":156410,"price_max":156410,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301564661827,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton Vox 301 - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton Vox 301 - price per pair.","public_title":null,"options":["Default Title"],"price":156410,"weight":999990,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/77cc8cc98a05ec133670d6619ed13c74.jpg?v=1539265429","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/1962ed07b488e4df8b9b02133c851ff4.gif?v=1539265429","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/f1c684948b66ee96b32f4d939280bba1.gif?v=1539265429","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/53a39a0de7b9206b13ca52300fdd2040.gif?v=1539265429"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/77cc8cc98a05ec133670d6619ed13c74.jpg?v=1539265429","options":["Title"],"content":"\u003cp\u003e\r\n\tThis is the largest of the Vox designs, employing a massive 12 inch bass driver along with high quality mid range and tweeter. This is a speaker for organ fans but also anyone who likes a large scale, dynamic sound which can really dig deep. VOX 301 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5915\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe VOX 301 extends the high-end VOX series upwards. While the mid-to-high-range is the same as in the VOX 253, the TIW 300 8 Ohm has been chosen as the woofer for this model. As a result, while the excellent characteristics experienced in the mid-to-high range remain the same, the level accuracy and dynamics in the bass department have been increased and the lower limiting frequency reduced to a remarkable 23 Hz. The VOX 301 can, therefore, be seen as the VOX variant for high-volume aficionados who like to hear concerts at close to the original sound levels in large rooms. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAt first sight, the construction of the VOX 301 looks complicated, which is why it is worth looking at each internal part individually first. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn the lower part of the cabinet, you can see the bass reflex tunnel, made up of the base and an upper board. In the middle, there are three cross-reinforcements to prevent resonance. At the top of the cabinet, behind the cut-out in the acoustic baffle for the mid- to high-range unit, is the enclosure required for the mid-range cone, made up of two wooden boards. Three 8 mm holes will have to be drilled in the rear wall of the mid-range chamber for the cables. They should not be drilled directly behind the driver because otherwise there will not be enough depth available for the wires behind the magnets. The holes must be well sealed afterwards. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFitting the TIW 300 into the side is a special feature. The mounting board for the TIW 300 (400 x 352 with a 289 mm cut-out) itself is glued in place from inside behind the square cut-outs in the corresponding side-wall. This means that the bass driver can be recessed by 19 mm (19 mm = thickness of the boards). For optical reasons, and to enable the cloth-covered frame to be fitted exactly in place, the side-wall cut-out must be made extremely accurately. The frame can be made from a 12 mm board. The outer dimensions of the frame should be exactly 1 mm smaller than the opening in the side-wall all round. In this way, the frame is jammed in place by the fabric used to cover it and alternative fixing methods (wooden plugs) are not necessary. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tTwo triangular reinforcing pieces are installed between the front panel and side walls to provide the required rigidity at the front despite the broad bevel. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe frequency crossover unit is mounted on the side-wall behind the bass cut-out. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe damping uses one mat placed in the medium range cabinet. The remainder is evenly distributed throughout the cabinet. The area above the tunnel opening (at the rear of the front panel) up to the lower edge of the reinforcement remains free. If, as a result of the acoustics in the room, the low-range bass is too powerful, damping this area will have a corresponding effect on the overall bass output level.\u003c\/p\u003e\r\n"}
Visaton Vox 301 - price per pair.

Visaton Vox 301 - price per pair.

ex VAT
£1,876.92 inc VAT

This is the largest of the Vox designs, employing a massive 12 inch bass driver along with high quality mid range and tweeter. This is a speaker for organ fans but also anyone who likes a large scale, dynamic sound which can really dig deep. VOX 301 Art. No. 5915 Characteristics and sound properties The VOX 301 extends the hig...


More Info
Visaton VOX 253 MTI - price per pair.

Visaton - Loudspeaker Kits & Accessories

£2,032.56 inc VAT
{"id":1676695437379,"title":"Visaton VOX 253 MTI - price per pair.","handle":"visaton-vox-253-mti-price-per-pair","description":"\u003cp\u003e\r\n\t\u003cspan style=\"font-size:20px;\"\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003eComplete Kits with \u003c\/strong\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003eflat\u003c\/strong\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003e pack or fully assembled cabinets available from \u003ca href=\"http:\/\/www.wilmslow-audio.co.uk\/visaton-vox-253-mti-2691-p.asp\"\u003e\u003cfont color=\"#38b0e3\" style=\"color: rgb(56, 176, 227); cursor: pointer;\"\u003e\u003cspan style=\"cursor: pointer;\"\u003eWilmslow Audio\u003c\/span\u003e\u003c\/font\u003e\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan style=\"font-size:20px;\"\u003e\u003cbr\u003e\r\n\t\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThe 253 MTI is the top of the Vox range, using the best drivers that Visaton makes. It is a true high-end design with all the scale, detail and drama that you only get with the best systems. These speakers deserve to be partnered with high-quality amplifieVOX 253 MTI \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5987 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003eCharacteristics and sound properties\u003c\/strong\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe VOX 253 MTI is the current highlight in the VOX series. The uncompromising approach, involving fitting the TI 100 8 Ohm as the low- to mid-range unit and the MHT 12 8 Ohm as the tweeter, worked highly successfully in the TOPAS. Following the basic design concept of the VOX series, this system is fitted with two TI 100 8 Ohm 's as low- to mid-range units and the TIW 250 XS 8 Ohm as the woofer.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tOne particularly convenient innovation is used for the first time in the VOX 253 MTI: it is now possible to tune the bass output level on the crossover unit. Depending on the acoustic properties of the room and personal preference, the bass output might be too strong, if the speakers are placed close to a wall, for example. The adjustment unit is mounted on the crossover unit directly parallel to the woofer and enables to listener to adjust the output level between 70 Hz and 150 Hz. The lower-frequency bass is not affected. Increasing the resistance affects the bass output: 10 ohms for a minimal reduction in bass and 3.3 ohms for maximum reduction. If the adjuster is left open (i.e. resistance is infinite), bass output reduction is deactivated.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAt first sight, the construction of the VOX 253 MTI looks complicated, which is why it is worth looking at each internal part individually first. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn the lower part of the cabinet, you can see the bass reflex tunnel, made up of the base and two upper boards. In the middle, there are five cross-reinforcements to prevent resonance. At the top of the cabinet, behind the cut-out in the acoustic baffle for the mid- to high-range unit, is the enclosure required for the mid-range cone, made up of two wooden boards. Three 8 mm holes will have to be drilled in the rear wall of the mid-range chamber for the cables. They should not be drilled directly behind the driver because otherwise there will not be enough depth available for the wires behind the magnets. The holes must be well sealed afterwards. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFitting the TIW 250 XS into the side is a special feature. The mounting board for the TIW 250 (380 x 283 with a 235 mm cut-out) itself is glued in place from inside behind the cut-outs in the corresponding side-wall. This means that the bass driver can be recessed by 19 mm (19 mm = thickness of the boards). For optical reasons the side-wall cut-out must be made extremely accurately. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tTwo triangular reinforcing pieces are installed between the front panel and side walls to provide the required rigidity at the front despite the broad bevel. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe frequency crossover unit is mounted on the side-wall behind the bass cut-out. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe damping uses one mat placed in the medium range cabinet. The remainder is evenly distributed throughout the cabinet. The area above the tunnel opening (at the rear of the front panel) up to the lower edge of the reinforcement remains free. If, as a result of the acoustics in the room, the low-range bass is too powerful, damping this area will have a corresponding effect on the overall bass output level.\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:40:54+01:00","created_at":"2018-10-11T14:40:55+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":169380,"price_min":169380,"price_max":169380,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301427757123,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton VOX 253 MTI - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton VOX 253 MTI - price per pair.","public_title":null,"options":["Default Title"],"price":169380,"weight":999990,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/ac6175bbee94cd8cac7fe609048d1861.jpg?v=1539265255","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/25e24f4d827c8793e8057bde75567b7d.gif?v=1539265255","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/1338b2bbc417d4a96aff9c7ead7b7c82.gif?v=1539265255","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/8bb342ffd668ddebdea0d7bfb4eb6939.gif?v=1539265255"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/ac6175bbee94cd8cac7fe609048d1861.jpg?v=1539265255","options":["Title"],"content":"\u003cp\u003e\r\n\t\u003cspan style=\"font-size:20px;\"\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003eComplete Kits with \u003c\/strong\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003eflat\u003c\/strong\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003e pack or fully assembled cabinets available from \u003ca href=\"http:\/\/www.wilmslow-audio.co.uk\/visaton-vox-253-mti-2691-p.asp\"\u003e\u003cfont color=\"#38b0e3\" style=\"color: rgb(56, 176, 227); cursor: pointer;\"\u003e\u003cspan style=\"cursor: pointer;\"\u003eWilmslow Audio\u003c\/span\u003e\u003c\/font\u003e\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan style=\"font-size:20px;\"\u003e\u003cbr\u003e\r\n\t\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThe 253 MTI is the top of the Vox range, using the best drivers that Visaton makes. It is a true high-end design with all the scale, detail and drama that you only get with the best systems. These speakers deserve to be partnered with high-quality amplifieVOX 253 MTI \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5987 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003eCharacteristics and sound properties\u003c\/strong\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe VOX 253 MTI is the current highlight in the VOX series. The uncompromising approach, involving fitting the TI 100 8 Ohm as the low- to mid-range unit and the MHT 12 8 Ohm as the tweeter, worked highly successfully in the TOPAS. Following the basic design concept of the VOX series, this system is fitted with two TI 100 8 Ohm 's as low- to mid-range units and the TIW 250 XS 8 Ohm as the woofer.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tOne particularly convenient innovation is used for the first time in the VOX 253 MTI: it is now possible to tune the bass output level on the crossover unit. Depending on the acoustic properties of the room and personal preference, the bass output might be too strong, if the speakers are placed close to a wall, for example. The adjustment unit is mounted on the crossover unit directly parallel to the woofer and enables to listener to adjust the output level between 70 Hz and 150 Hz. The lower-frequency bass is not affected. Increasing the resistance affects the bass output: 10 ohms for a minimal reduction in bass and 3.3 ohms for maximum reduction. If the adjuster is left open (i.e. resistance is infinite), bass output reduction is deactivated.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAt first sight, the construction of the VOX 253 MTI looks complicated, which is why it is worth looking at each internal part individually first. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn the lower part of the cabinet, you can see the bass reflex tunnel, made up of the base and two upper boards. In the middle, there are five cross-reinforcements to prevent resonance. At the top of the cabinet, behind the cut-out in the acoustic baffle for the mid- to high-range unit, is the enclosure required for the mid-range cone, made up of two wooden boards. Three 8 mm holes will have to be drilled in the rear wall of the mid-range chamber for the cables. They should not be drilled directly behind the driver because otherwise there will not be enough depth available for the wires behind the magnets. The holes must be well sealed afterwards. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFitting the TIW 250 XS into the side is a special feature. The mounting board for the TIW 250 (380 x 283 with a 235 mm cut-out) itself is glued in place from inside behind the cut-outs in the corresponding side-wall. This means that the bass driver can be recessed by 19 mm (19 mm = thickness of the boards). For optical reasons the side-wall cut-out must be made extremely accurately. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tTwo triangular reinforcing pieces are installed between the front panel and side walls to provide the required rigidity at the front despite the broad bevel. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe frequency crossover unit is mounted on the side-wall behind the bass cut-out. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe damping uses one mat placed in the medium range cabinet. The remainder is evenly distributed throughout the cabinet. The area above the tunnel opening (at the rear of the front panel) up to the lower edge of the reinforcement remains free. If, as a result of the acoustics in the room, the low-range bass is too powerful, damping this area will have a corresponding effect on the overall bass output level.\u003c\/p\u003e\r\n"}
Visaton VOX 253 MTI - price per pair.

Visaton VOX 253 MTI - price per pair.

£1,564.10 ex VAT
£2,032.56 inc VAT

Complete Kits with flat pack or fully assembled cabinets available from Wilmslow Audio. The 253 MTI is the top of the Vox range, using the best drivers that Visaton makes. It is a true high-end design with all the scale, detail and drama that you only get with the best systems. These speakers deserve to be partnered with high-qual...


More Info
Visaton VOX 253 MHT - price per pair.

Visaton - Loudspeaker Kits & Accessories

£1,735.22 inc VAT
{"id":1676684197955,"title":"Visaton VOX 253 MHT - price per pair.","handle":"visaton-vox-253-mht-price-per-pair","description":"\u003cp\u003e\r\n\t\u003cspan style=\"font-size:20px;\"\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003eComplete Kits with \u003c\/strong\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003eflat\u003c\/strong\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003e pack or fully assembled cabinets available from \u003ca href=\"http:\/\/www.wilmslow-audio.co.uk\/visaton-vox-253-mht-2634-p.asp\"\u003e\u003cfont color=\"#38b0e3\" style=\"color: rgb(56, 176, 227); cursor: pointer;\"\u003e\u003cspan style=\"cursor: pointer;\"\u003eWilmslow Audio\u003c\/span\u003e\u003c\/font\u003e\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan style=\"font-size:20px;\"\u003e\u003cbr\u003e\r\n\t\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tOne of Visaton's best loudspeaker systems, employing the excellent MHT 12 ribbon tweeter with two AL 130 midrange and one side mounted TIW 250 XS 10-inch bass unit. Superbly well balanced and enormously powerful. (1 pair of speakers, assembly required)Art. No. 5983 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tDue to the deep starting frequency of the MHT 12 8 OHM, it is possible to make use of this magnetostat in the VOX 253. Of course, the crossover has to be changed from that used in the original version with its KE 25 SC 8 OHM. Fortunately, the AL 130 8 OHM 's only have to be separated slightly higher which means we are still a long way from the baffle resonance levels. Here, too, the transfer frequency is 3000 Hz. As can be seen from the dotted frequency curves for the individual drivers, the AL 130 8 OHM drop off at 2000 Hz and the MHT 12 8 OHM at 4500 Hz and meet again at 3000 Hz and -6 dB. The magnetostat need not by any means produce its full output at 3000 Hz, as some people often believe. This would not make sense in terms of achieving the lowest possible distortion factor. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSince the front panel of the MHT 12 8 OHM is slightly larger, the AL 130 8 OHM 's have to be spaced a little further apart (10 mm). \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAs regards their sound quality, both versions (original VOX 253 with KE 25 SC and VOX 253 MHT) are at the same high level. The version preferred by each particular customer will depend on personal taste, the type of music you listen to and how you listen. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAdditional Technical Data: Cut-off frequency 200 \/ 3000 Hz\u003cbr\u003e\r\n\tPrinciple of Housing Bassreflex\u003cbr\u003e\r\n\tNet volume 70 l + 4 l\u003cbr\u003e\r\n\tOuter dimension height 1150 mm\u003cbr\u003e\r\n\tOuter dimension width 235 mm\u003cbr\u003e\r\n\tOuter dimension depth 400 mm\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn the lower part of the cabinet, you can see the tunnel, made up of the base and an upper board. In the middle, there are three cross-reinforcements. At the top of the cabinet, behind the cut-out in the baffle for the mid- to high-range unit, is the enclosure required for the mid-range cone, made up of two wooden boards. Three 8 mm holes has to be drilled into the rear board of the mid-range enclosure for the connection leads. These holes have to be sealed well.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFitting the TIW 250 XS into the side is a special feature. The mounting board for the TIW 250 XS (346 x 297 with a 235 mm cut-out) itself is glued in place from inside behind the round cut-outs in the corresponding side panel. This means that the bass driver can be sunken by 19 mm (19 mm = thickness of the boards). For optical reasons, the side panel cut-out must be made extremely accurately.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe crossover unit is mounted on the side panel behind the bass port.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe damping uses one mat placed in the medium range cabinet. The remainder is evenly distributed throughout the cabinet. The area above the tunnel opening (at the rear of the front panel) up to the lower edge of the reinforcement remains free. If, as a result of the acoustics in the room, the low-range bass is too powerful, damping this area will have a corresponding effect on the overall bass output level.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eComponent parts list for 1 box\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tTweeter MHT 12 8 Ohm 1 piece\u003cbr\u003e\r\n\tMidrange AL 130 8 Ohm 2 pieces\u003cbr\u003e\r\n\tWoofer TIW 250 XS 8 Ohm 1 piece\u003cbr\u003e\r\n\tCrossover \"VOX 253 MHT\"\u003cbr\u003e\r\n\tTerminal BT 95\/75 1 piece\u003cbr\u003e\r\n\tDamping material 4 bags\u003cbr\u003e\r\n\tSpecial wood screws 5 x 30 mm 6 pieces\u003cbr\u003e\r\n\tWood screws 3,5 x 19 mm 12 pieces\u003cbr\u003e\r\n\tCountersunk screws 3,5 x 25 mm 4 pieces\u003cbr\u003e\r\n\tCable 2x 1,5 mm2 2 m 2x 2,5 mm2 2,5 m\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCabinet parts list for 1 box\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tParts Size (mm) Quantity\u003cbr\u003e\r\n\tMaterial: 19 mm MDF or chipboard\u003cbr\u003e\r\n\tSide panels 1150 x 378 2\u003cbr\u003e\r\n\tBottom panel 197 x 378 1\u003cbr\u003e\r\n\tRear panel 197 x 1051 1\u003cbr\u003e\r\n\tTop panel 197 x 359 1\u003cbr\u003e\r\n\tBass reflex channel 197 x 270 1\u003cbr\u003e\r\n\tBrace 197 x 100 2\u003cbr\u003e\r\n\tBrace 197 x 60 1\u003cbr\u003e\r\n\tMidrange rear panel 197 x 500 1\u003cbr\u003e\r\n\tMidrange bottom panel 197 x 43 1\u003cbr\u003e\r\n\tMounting board woofer 346 x 297 1\u003cbr\u003e\r\n\tMaterial: 22 mm MDF or chipboard\u003cbr\u003e\r\n\tFront panel 1150 x 235 1\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:39:45+01:00","created_at":"2018-10-11T14:39:46+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":144602,"price_min":144602,"price_max":144602,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301373395011,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton VOX 253 MHT - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton VOX 253 MHT - price per pair.","public_title":null,"options":["Default Title"],"price":144602,"weight":999990,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/91cd00d1d981136ef6d7e1a2bd598893.jpg?v=1539265186","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/2998b4f66a74c25081911fca5ee45db2.gif?v=1539265186","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/e631f567b80a7412432c35dd868d3a86.gif?v=1539265186","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/8d1bbdd9cdf7b7b00c690d16ab49cdaf.gif?v=1539265186"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/91cd00d1d981136ef6d7e1a2bd598893.jpg?v=1539265186","options":["Title"],"content":"\u003cp\u003e\r\n\t\u003cspan style=\"font-size:20px;\"\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003eComplete Kits with \u003c\/strong\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003eflat\u003c\/strong\u003e\u003cstrong style=\"color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif;\"\u003e pack or fully assembled cabinets available from \u003ca href=\"http:\/\/www.wilmslow-audio.co.uk\/visaton-vox-253-mht-2634-p.asp\"\u003e\u003cfont color=\"#38b0e3\" style=\"color: rgb(56, 176, 227); cursor: pointer;\"\u003e\u003cspan style=\"cursor: pointer;\"\u003eWilmslow Audio\u003c\/span\u003e\u003c\/font\u003e\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan style=\"font-size:20px;\"\u003e\u003cbr\u003e\r\n\t\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tOne of Visaton's best loudspeaker systems, employing the excellent MHT 12 ribbon tweeter with two AL 130 midrange and one side mounted TIW 250 XS 10-inch bass unit. Superbly well balanced and enormously powerful. (1 pair of speakers, assembly required)Art. No. 5983 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tDue to the deep starting frequency of the MHT 12 8 OHM, it is possible to make use of this magnetostat in the VOX 253. Of course, the crossover has to be changed from that used in the original version with its KE 25 SC 8 OHM. Fortunately, the AL 130 8 OHM 's only have to be separated slightly higher which means we are still a long way from the baffle resonance levels. Here, too, the transfer frequency is 3000 Hz. As can be seen from the dotted frequency curves for the individual drivers, the AL 130 8 OHM drop off at 2000 Hz and the MHT 12 8 OHM at 4500 Hz and meet again at 3000 Hz and -6 dB. The magnetostat need not by any means produce its full output at 3000 Hz, as some people often believe. This would not make sense in terms of achieving the lowest possible distortion factor. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSince the front panel of the MHT 12 8 OHM is slightly larger, the AL 130 8 OHM 's have to be spaced a little further apart (10 mm). \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAs regards their sound quality, both versions (original VOX 253 with KE 25 SC and VOX 253 MHT) are at the same high level. The version preferred by each particular customer will depend on personal taste, the type of music you listen to and how you listen. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAdditional Technical Data: Cut-off frequency 200 \/ 3000 Hz\u003cbr\u003e\r\n\tPrinciple of Housing Bassreflex\u003cbr\u003e\r\n\tNet volume 70 l + 4 l\u003cbr\u003e\r\n\tOuter dimension height 1150 mm\u003cbr\u003e\r\n\tOuter dimension width 235 mm\u003cbr\u003e\r\n\tOuter dimension depth 400 mm\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn the lower part of the cabinet, you can see the tunnel, made up of the base and an upper board. In the middle, there are three cross-reinforcements. At the top of the cabinet, behind the cut-out in the baffle for the mid- to high-range unit, is the enclosure required for the mid-range cone, made up of two wooden boards. Three 8 mm holes has to be drilled into the rear board of the mid-range enclosure for the connection leads. These holes have to be sealed well.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFitting the TIW 250 XS into the side is a special feature. The mounting board for the TIW 250 XS (346 x 297 with a 235 mm cut-out) itself is glued in place from inside behind the round cut-outs in the corresponding side panel. This means that the bass driver can be sunken by 19 mm (19 mm = thickness of the boards). For optical reasons, the side panel cut-out must be made extremely accurately.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe crossover unit is mounted on the side panel behind the bass port.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe damping uses one mat placed in the medium range cabinet. The remainder is evenly distributed throughout the cabinet. The area above the tunnel opening (at the rear of the front panel) up to the lower edge of the reinforcement remains free. If, as a result of the acoustics in the room, the low-range bass is too powerful, damping this area will have a corresponding effect on the overall bass output level.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eComponent parts list for 1 box\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tTweeter MHT 12 8 Ohm 1 piece\u003cbr\u003e\r\n\tMidrange AL 130 8 Ohm 2 pieces\u003cbr\u003e\r\n\tWoofer TIW 250 XS 8 Ohm 1 piece\u003cbr\u003e\r\n\tCrossover \"VOX 253 MHT\"\u003cbr\u003e\r\n\tTerminal BT 95\/75 1 piece\u003cbr\u003e\r\n\tDamping material 4 bags\u003cbr\u003e\r\n\tSpecial wood screws 5 x 30 mm 6 pieces\u003cbr\u003e\r\n\tWood screws 3,5 x 19 mm 12 pieces\u003cbr\u003e\r\n\tCountersunk screws 3,5 x 25 mm 4 pieces\u003cbr\u003e\r\n\tCable 2x 1,5 mm2 2 m 2x 2,5 mm2 2,5 m\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCabinet parts list for 1 box\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tParts Size (mm) Quantity\u003cbr\u003e\r\n\tMaterial: 19 mm MDF or chipboard\u003cbr\u003e\r\n\tSide panels 1150 x 378 2\u003cbr\u003e\r\n\tBottom panel 197 x 378 1\u003cbr\u003e\r\n\tRear panel 197 x 1051 1\u003cbr\u003e\r\n\tTop panel 197 x 359 1\u003cbr\u003e\r\n\tBass reflex channel 197 x 270 1\u003cbr\u003e\r\n\tBrace 197 x 100 2\u003cbr\u003e\r\n\tBrace 197 x 60 1\u003cbr\u003e\r\n\tMidrange rear panel 197 x 500 1\u003cbr\u003e\r\n\tMidrange bottom panel 197 x 43 1\u003cbr\u003e\r\n\tMounting board woofer 346 x 297 1\u003cbr\u003e\r\n\tMaterial: 22 mm MDF or chipboard\u003cbr\u003e\r\n\tFront panel 1150 x 235 1\u003c\/p\u003e\r\n"}
Visaton VOX 253 MHT - price per pair.

Visaton VOX 253 MHT - price per pair.

£1,693.80 ex VAT
£1,735.22 inc VAT

Complete Kits with flat pack or fully assembled cabinets available from Wilmslow Audio. One of Visaton's best loudspeaker systems, employing the excellent MHT 12 ribbon tweeter with two AL 130 midrange and one side mounted TIW 250 XS 10-inch bass unit. Superbly well balanced and enormously powerful. (1 pair of speakers, assembly r...


More Info
Visaton Vox 253 Loadspeaker Kit - price per pair.

Visaton - Loudspeaker Kits & Accessories

£1,658.57 inc VAT
{"id":1676696485955,"title":"Visaton Vox 253 Loadspeaker Kit - price per pair.","handle":"visaton-vox-253-loadspeaker-kit-price-per-pair","description":"\u003cp\u003e\r\n\tMakes one pair of speakers.VOX 253 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5985 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe VOX 253 is an upright speaker with its subwoofer TIW 250 XS 8 Ohm let into the side-wall. This design enables the front panel to be kept very narrow making it that much easier to position. One of the most outstanding features of the TIW 250 XS 8 Ohm is its unbelievable ability to reproduce the lowest range bass in surprisingly small cabinets. In the listening area, the bass pressure becomes tangible rather than audible, the sort of effect you would normally only expect from much larger speakers. As a result of the side-opening position of the TIW 250 XS 8 Ohm, the separating frequency between the subwoofer and the mid-range drivers has to be very low. This has been achieved by means of an especially intelligent frequency cross-over design. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn order not to restrict the dynamics at higher bass levels, a bass reflex tube with an exceptionally large cross-section and corresponding length has been designed. In this way, flow-related losses are kept to a minimum. The vent is at the bottom in the rear wall so as not to interfere with the attractive appearance of the front face. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe only difference between VOX 253 and VOX 252 is the new woofer TIW 250 XS 8 Ohm. A change of the crossover was not necessary. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThis version of the VOX contains the high-end ceramic dome tweeter KE 25 SC 8 Ohm. An 18 dB high-pass filter produces an optimum phase relationship between tweeter an midrange. This creates an improvement of the clear location of each individual voice or instrument. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn the lower part of the cabinet, you can see the tunnel, made up of the base and an upper board. In the middle, there are three cross-reinforcements. At the top of the cabinet, behind the cut-out in the baffle for the mid- to high-range unit, is the enclosure required for the mid-range cone, made up of two wooden boards. Three 8 mm holes has to be drilled into the rear board of the mid-range enclosure for the connection leads. These holes have to be sealed well. Fitting the TIW 250 XS into the side is a special feature. The mounting board for the TIW 250 XS (346 x 297 with a 235 mm cut-out) itself is glued in place from inside behind the round cut-outs in the corresponding side panel. This means that the bass driver can be sunken by 19 mm (19 mm = thickness of the boards). For optical reasons the side panel cut-out must be made extremely accurately. The crossover unit is mounted on the side panel behind the bass port. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe damping uses one mat placed in the medium range cabinet. The remainder is evenly distributed throughout the cabinet. The area above the tunnel opening (at the rear of the front panel) up to the lower edge of the reinforcement remains free. If, as a result of the acoustics in the room, the low-range bass is too powerful, damping this area will have a corresponding effect on the overall bass output level.\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:41:01+01:00","created_at":"2018-10-11T14:41:02+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":138214,"price_min":138214,"price_max":138214,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301433098307,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton Vox 253 Loadspeaker Kit - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton Vox 253 Loadspeaker Kit - price per pair.","public_title":null,"options":["Default Title"],"price":138214,"weight":999990,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/e90b92cdbe75f52177e69b0af4b1d2a5.jpg?v=1539265262","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/bdd301435c456686f8e36acf13569fc6.gif?v=1539265262","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/6fb8b3ff4dc75b8743e85e1b3f235490.gif?v=1539265262","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/9e9a102a967196d27c7409bda2069848.gif?v=1539265262"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/e90b92cdbe75f52177e69b0af4b1d2a5.jpg?v=1539265262","options":["Title"],"content":"\u003cp\u003e\r\n\tMakes one pair of speakers.VOX 253 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5985 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe VOX 253 is an upright speaker with its subwoofer TIW 250 XS 8 Ohm let into the side-wall. This design enables the front panel to be kept very narrow making it that much easier to position. One of the most outstanding features of the TIW 250 XS 8 Ohm is its unbelievable ability to reproduce the lowest range bass in surprisingly small cabinets. In the listening area, the bass pressure becomes tangible rather than audible, the sort of effect you would normally only expect from much larger speakers. As a result of the side-opening position of the TIW 250 XS 8 Ohm, the separating frequency between the subwoofer and the mid-range drivers has to be very low. This has been achieved by means of an especially intelligent frequency cross-over design. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn order not to restrict the dynamics at higher bass levels, a bass reflex tube with an exceptionally large cross-section and corresponding length has been designed. In this way, flow-related losses are kept to a minimum. The vent is at the bottom in the rear wall so as not to interfere with the attractive appearance of the front face. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe only difference between VOX 253 and VOX 252 is the new woofer TIW 250 XS 8 Ohm. A change of the crossover was not necessary. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThis version of the VOX contains the high-end ceramic dome tweeter KE 25 SC 8 Ohm. An 18 dB high-pass filter produces an optimum phase relationship between tweeter an midrange. This creates an improvement of the clear location of each individual voice or instrument. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn the lower part of the cabinet, you can see the tunnel, made up of the base and an upper board. In the middle, there are three cross-reinforcements. At the top of the cabinet, behind the cut-out in the baffle for the mid- to high-range unit, is the enclosure required for the mid-range cone, made up of two wooden boards. Three 8 mm holes has to be drilled into the rear board of the mid-range enclosure for the connection leads. These holes have to be sealed well. Fitting the TIW 250 XS into the side is a special feature. The mounting board for the TIW 250 XS (346 x 297 with a 235 mm cut-out) itself is glued in place from inside behind the round cut-outs in the corresponding side panel. This means that the bass driver can be sunken by 19 mm (19 mm = thickness of the boards). For optical reasons the side panel cut-out must be made extremely accurately. The crossover unit is mounted on the side panel behind the bass port. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe damping uses one mat placed in the medium range cabinet. The remainder is evenly distributed throughout the cabinet. The area above the tunnel opening (at the rear of the front panel) up to the lower edge of the reinforcement remains free. If, as a result of the acoustics in the room, the low-range bass is too powerful, damping this area will have a corresponding effect on the overall bass output level.\u003c\/p\u003e\r\n"}
Visaton Vox 253 Loadspeaker Kit - price per pair.

Visaton Vox 253 Loadspeaker Kit - price per pair.

£1,446.02 ex VAT
£1,658.57 inc VAT

Makes one pair of speakers.VOX 253 Art. No. 5985 Characteristics and sound properties The VOX 253 is an upright speaker with its subwoofer TIW 250 XS 8 Ohm let into the side-wall. This design enables the front panel to be kept very narrow making it that much easier to position. One of the most outstanding features of the TIW...


More Info
Visaton Vox 200 - price per pair.

Visaton - Loudspeaker Kits & Accessories

£1,479.70 inc VAT
{"id":1676683640899,"title":"Visaton Vox 200 - price per pair.","handle":"visaton-vox-200-price-per-pair","description":"\u003cp\u003e\r\n\tA superbly clear and analytical speaker with excellent power and clarity of resolution. Employing two TI 100 bass\/mid drivers, 1 G 20 FFL tweeter and an AL 200 8 inch bass mounted in the side of the speaker. (1 pair of speakers, assembly required)\u003ci\u003eExtract from Image HiFi\u003c\/i\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tVisaton's Vox 200 is a decidedly crisp, clear column speaker with both the power to do justice to any party and the control to cope with accurate spatial positioning and clarity of resolution. A real gem that stands head and shoulders above the others in this price range. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe Vox 200 can punch out quite considerable volume levels and the probability that the electronic circuitry will pack up first is quite high even with larger0scale units. The Vox 200 is also well able to deal with normal living-room levels. The way each wave of sound is neatly sent off into the room by the cabinet is captivating, to say the least, and the spatial control is exemplary. The Visaton designers are capable of creating a virtual stage in your living room that has a remarkable breadth and depth. In this department, other manufacturers' units many times the price can hardly manage to trump this performance. Similarly, the plasticity and sheer volume of each individual cone leaves nothing to be desired. The real showpiece, though, is the unit's vocal reproduction(...). I have seldom experienced such authentic singling free of all interference factors and with such depth of colour. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tI can say that these two slim-line VISATON cabinets have left a deep impression on me, for one.\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:39:42+01:00","created_at":"2018-10-11T14:39:42+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":123308,"price_min":123308,"price_max":123308,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301367857219,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton Vox 200 - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton Vox 200 - price per pair.","public_title":null,"options":["Default Title"],"price":123308,"weight":1000,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/dbb0917d70a057cfe01c5e23742cb01c.jpg?v=1539265183","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/21b246e3d48beeee3aa5c4eb277099a0.gif?v=1539265183","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/415b4b175273a70edac346b43c8af5db.gif?v=1539265183","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/abf892ef726b93a1618fef270a96e2a6.gif?v=1539265183"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/dbb0917d70a057cfe01c5e23742cb01c.jpg?v=1539265183","options":["Title"],"content":"\u003cp\u003e\r\n\tA superbly clear and analytical speaker with excellent power and clarity of resolution. Employing two TI 100 bass\/mid drivers, 1 G 20 FFL tweeter and an AL 200 8 inch bass mounted in the side of the speaker. (1 pair of speakers, assembly required)\u003ci\u003eExtract from Image HiFi\u003c\/i\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tVisaton's Vox 200 is a decidedly crisp, clear column speaker with both the power to do justice to any party and the control to cope with accurate spatial positioning and clarity of resolution. A real gem that stands head and shoulders above the others in this price range. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe Vox 200 can punch out quite considerable volume levels and the probability that the electronic circuitry will pack up first is quite high even with larger0scale units. The Vox 200 is also well able to deal with normal living-room levels. The way each wave of sound is neatly sent off into the room by the cabinet is captivating, to say the least, and the spatial control is exemplary. The Visaton designers are capable of creating a virtual stage in your living room that has a remarkable breadth and depth. In this department, other manufacturers' units many times the price can hardly manage to trump this performance. Similarly, the plasticity and sheer volume of each individual cone leaves nothing to be desired. The real showpiece, though, is the unit's vocal reproduction(...). I have seldom experienced such authentic singling free of all interference factors and with such depth of colour. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tI can say that these two slim-line VISATON cabinets have left a deep impression on me, for one.\u003c\/p\u003e\r\n"}
Visaton Vox 200 - price per pair.

Visaton Vox 200 - price per pair.

£1,382.14 ex VAT
£1,479.70 inc VAT

A superbly clear and analytical speaker with excellent power and clarity of resolution. Employing two TI 100 bass/mid drivers, 1 G 20 FFL tweeter and an AL 200 8 inch bass mounted in the side of the speaker. (1 pair of speakers, assembly required)Extract from Image HiFi Visaton's Vox 200 is a decidedly crisp, clear column speaker with b...


More Info
Visaton Solitude Loadspeaker Kit - price per pair.

Visaton - Loudspeaker Kits & Accessories

£1,449.50 inc VAT
{"id":1676721061955,"title":"Visaton Solitude Loadspeaker Kit - price per pair.","handle":"visaton-solitude-loadspeaker-kit-price-per-pair","description":"\u003cp\u003e\r\n\tMakes 1 pair of speakersSOLITUDE \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5988 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe SOLITUDE set-up combines the direct, highly precise sound reproduction of the B 200 6 Ohm wide-range speaker with the dynamic bass of two GF 200 2 x 4 Ohm. The B 200 6 Ohm is fitted in a completely enclosed, heavily damped compartment. The two GF 200 2 x 4 Ohm woofers are mounted in a voluminous cabinet with a generously dimensioned bass reflex tube. Owing to the very low-frequency separation, SOLITUDE is, in effect, a wide-range speaker with a subwoofer. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFirst impressions: fantastic sound! A synthesis of the precision localisation, clarity and analytical precision of the SOLO 100 or SOLO 50 (straight down the axis) and the level accuracy of the CONCORDE MK II. The bass is deep but not heavy, the medium range clearly evident, with no fuzzy fringes. We could not detect a break between the bass and the rest - the sound was more homogeneous and pure than we had ever heard from any other wide-range speakers. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe two sections have to be reverse connected. In so doing, it does not matter whether the bass is connected correctly or not as long as the SOLITUDE is playing on its own. In conjunction with other speakers (e.g. in a multichannel system) the bass must, of course be in sync. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe cabinet sections, cut from 19 mm chipboard or medium density fibreboard (MDF) board are butt jointed and glued. The chamfers on the baffle can be made with a jigsaw or circular saw set to 45° or added later using an orbital sander. After that, the openings for the driver and terminals are cut out. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe crossover can be attached to the rear wall behind the baffle cut-out for the upper woofer. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tDistribute all the damping material (7 mats) uniformly inside the chamber for the wide-range speaker. The entire woofer chamber does not require damping.\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:44:01+01:00","created_at":"2018-10-11T14:44:02+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":120792,"price_min":120792,"price_max":120792,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301572034627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton Solitude Loadspeaker Kit - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton Solitude Loadspeaker Kit - price per pair.","public_title":null,"options":["Default Title"],"price":120792,"weight":999990,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/9471374da86e387e914449f210229248.jpg?v=1539265442","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/3807f629455ec877c9a1ef401b2e67bf.gif?v=1539265442","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/f4ae26f3554f1dcd1784de0c50151fb5.gif?v=1539265442","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/09e69f2f4c09f8150168dd8586062660.gif?v=1539265442"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/9471374da86e387e914449f210229248.jpg?v=1539265442","options":["Title"],"content":"\u003cp\u003e\r\n\tMakes 1 pair of speakersSOLITUDE \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5988 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe SOLITUDE set-up combines the direct, highly precise sound reproduction of the B 200 6 Ohm wide-range speaker with the dynamic bass of two GF 200 2 x 4 Ohm. The B 200 6 Ohm is fitted in a completely enclosed, heavily damped compartment. The two GF 200 2 x 4 Ohm woofers are mounted in a voluminous cabinet with a generously dimensioned bass reflex tube. Owing to the very low-frequency separation, SOLITUDE is, in effect, a wide-range speaker with a subwoofer. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFirst impressions: fantastic sound! A synthesis of the precision localisation, clarity and analytical precision of the SOLO 100 or SOLO 50 (straight down the axis) and the level accuracy of the CONCORDE MK II. The bass is deep but not heavy, the medium range clearly evident, with no fuzzy fringes. We could not detect a break between the bass and the rest - the sound was more homogeneous and pure than we had ever heard from any other wide-range speakers. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe two sections have to be reverse connected. In so doing, it does not matter whether the bass is connected correctly or not as long as the SOLITUDE is playing on its own. In conjunction with other speakers (e.g. in a multichannel system) the bass must, of course be in sync. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe cabinet sections, cut from 19 mm chipboard or medium density fibreboard (MDF) board are butt jointed and glued. The chamfers on the baffle can be made with a jigsaw or circular saw set to 45° or added later using an orbital sander. After that, the openings for the driver and terminals are cut out. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe crossover can be attached to the rear wall behind the baffle cut-out for the upper woofer. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eInner damping\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tDistribute all the damping material (7 mats) uniformly inside the chamber for the wide-range speaker. The entire woofer chamber does not require damping.\u003c\/p\u003e\r\n"}
Visaton Solitude Loadspeaker Kit - price per pair.

Visaton Solitude Loadspeaker Kit - price per pair.

£1,233.08 ex VAT
£1,449.50 inc VAT

Makes 1 pair of speakersSOLITUDE Art. No. 5988 Characteristics and sound properties The SOLITUDE set-up combines the direct, highly precise sound reproduction of the B 200 6 Ohm wide-range speaker with the dynamic bass of two GF 200 2 x 4 Ohm. The B 200 6 Ohm is fitted in a completely enclosed, heavily damped compartment. Th...


More Info
Visaton Quintett Light - Price Per Pair

Visaton - Loudspeaker Kits & Accessories

£847.87 inc VAT
{"id":1676765167683,"title":"Visaton Quintett Light - Price Per Pair","handle":"visaton-quintett-light-price-per-pair","description":"\u003cp\u003e\r\n\tJust as the light versions of VOX and COUPLET, the QUINTETT LIGHT is aimed at coming as close as possible to the outstanding sound quality of its \"big sister\", with substantial lower priced driver units.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tWhen listening to both the QUINTETT and the QUINTETT LIGHT, the direct comparison attests: Goal reached.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe QUINTETT LIGHT is, as well as the QUINTETT, a high efficiency speaker with a very balanced frequency response. Only in terms of dynamics and maximum sound pressure level, the QUINTETT LIGHT cannot fully keep up with the outstanding performance of the QUINTETT.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAnybody who is into the concept of the QUINTETT, but at a more favourable price, is well advised to take a closer look at the QUINTETT LIGHT.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"1\" width=\"100%\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003cth colspan=\"2\"\u003e\r\n\t\t\t\tTechnical Data:\u003c\/th\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tRated power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t140 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tMaximum power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t200 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tNominal impedance Z\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t8 Ohm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tFrequency response\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t35–20000 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tMean sound pressure level\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t86 dB (1 W\/1 m)\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tCut-off frequency\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t500 Hz\/4000 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tPrinciple of Housing\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\tBassreflex\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tNet volume\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t5 l + 51 l\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension height\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t1200 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension width\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t180 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension depth\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t380 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cimg alt=\"\" src=\"http:\/\/www.visaton.com\/bilder\/frequenz\/gross\/quintett_light_fs.gif\"\u003e\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:58:58+01:00","created_at":"2018-10-11T14:58:58+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":70656,"price_min":70656,"price_max":70656,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15302321143875,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton Quintett Light - Price Per Pair","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton Quintett Light - Price Per Pair","public_title":null,"options":["Default Title"],"price":70656,"weight":1000,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/36f90389bff8915f643aa498a8626552.jpg?v=1539266338"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/36f90389bff8915f643aa498a8626552.jpg?v=1539266338","options":["Title"],"content":"\u003cp\u003e\r\n\tJust as the light versions of VOX and COUPLET, the QUINTETT LIGHT is aimed at coming as close as possible to the outstanding sound quality of its \"big sister\", with substantial lower priced driver units.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tWhen listening to both the QUINTETT and the QUINTETT LIGHT, the direct comparison attests: Goal reached.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe QUINTETT LIGHT is, as well as the QUINTETT, a high efficiency speaker with a very balanced frequency response. Only in terms of dynamics and maximum sound pressure level, the QUINTETT LIGHT cannot fully keep up with the outstanding performance of the QUINTETT.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAnybody who is into the concept of the QUINTETT, but at a more favourable price, is well advised to take a closer look at the QUINTETT LIGHT.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"1\" width=\"100%\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003cth colspan=\"2\"\u003e\r\n\t\t\t\tTechnical Data:\u003c\/th\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tRated power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t140 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tMaximum power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t200 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tNominal impedance Z\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t8 Ohm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tFrequency response\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t35–20000 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tMean sound pressure level\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t86 dB (1 W\/1 m)\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tCut-off frequency\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t500 Hz\/4000 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tPrinciple of Housing\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\tBassreflex\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tNet volume\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t5 l + 51 l\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension height\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t1200 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension width\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t180 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension depth\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t380 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cimg alt=\"\" src=\"http:\/\/www.visaton.com\/bilder\/frequenz\/gross\/quintett_light_fs.gif\"\u003e\u003c\/p\u003e\r\n"}
Visaton Quintett Light - Price Per Pair

Visaton Quintett Light - Price Per Pair

£1,207.92 ex VAT
£847.87 inc VAT

Just as the light versions of VOX and COUPLET, the QUINTETT LIGHT is aimed at coming as close as possible to the outstanding sound quality of its "big sister", with substantial lower priced driver units. When listening to both the QUINTETT and the QUINTETT LIGHT, the direct comparison attests: Goal reached. The QUINTETT LIGHT is, as...


More Info
Visaton QUADRO - price per pair.

Visaton - Loudspeaker Kits & Accessories

£2,105.72 inc VAT
{"id":1676742918211,"title":"Visaton QUADRO - price per pair.","handle":"visaton-quadro-price-per-pair","description":"\u003cp\u003e\r\n\ta loudspeaker with a very high sensitivity rating\u003c\/p\u003e\r\n\u003cdiv align=\"center\"\u003e\r\n\t\u003cp style=\"TEXT-ALIGN: justify\"\u003e\r\n\t\t\u003cspan style=\"FONT-FAMILY: Arial\"\u003e\u003cfont size=\"2\"\u003eWhen the QUADRO was developed, the primary objective was to produce a loudspeaker with a very high sensitivity rating because the trend in recent times has been a retrograde one towards high-end tube amplifiers. However, these are often restricted to very low outputs of only a few watts. There are plenty of loudspeaker constructions which promise extremely high volume levels with only one watt but, on closer examination, are seen to produce that level only at medium and high frequencies. Extending the high sensitivity level to include low frequencies is indeed a challenge. To achieve that aim, it is crucial to include a very large diaphragm area which, in turn, requires a large sized cabinet if one wants decent bass volumes.\u003cbr\u003e\r\n\t\t\u003cbr\u003e\r\n\t\tThe generously sized enclosed QUADRO cabinet provides sufficient space for four of the excellent 200 6 Ohm fullrange loudspeakers to ensure that, even at the lower end of the bass frequency range, there is plenty of cone excursion. The drivers are closely bunched one above the other, which provides for an excellent radiation pattern: a broad angle in the horizontal plane and a relatively tightly bundled beam to top and bottom. To prevent the bundling effect becoming too strong in the vertical, all the drivers are powered in parallel in the bass frequencies and, as the frequency increases, the B 200 8 OHM s are phased out one after another so that, at very high frequencies, only the second driver from the bottom is working. The slightly tilted front bafflemeans that this full range loudspeaker is then aimed directly at ear height, assuming one is seated at least 3 metres from the speakers.\u003cbr\u003e\r\n\t\t\u003cbr\u003e\r\n\t\tAnyone with experience of the sound properties produced by the SOLO or SOLITUDE speakers will have a fairly clear idea of the clarity of sound produced by the QUADRO These qualities are, however, boosted by the fact that the air in the room is set in motion by a large diaphragm area but that force is hardly aimed at the floor or ceiling at all. A noticeable feature of the QUADRO are its clarity and analytical qualities, while, at the same time, not becoming obtrusive. The QUADRO may not be able to match the extremely deep bass output levels of the SOLITUDE for example, but that is in fact a positive feature in rooms that are not so large because the reverberating room resonance frequencies are not stimulated at all. However, the physically tangible kick-bass effect, a feature expected from musicians speakers, can indeed be produced if the amplifier is powerful enough. In addition, the QUADRO shows its strengths in the faithful reproduction of voices and recordings of large orchestras. It is fair to say, then that this is a good, all-round high-end loudspeaker.\u003c\/font\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n","published_at":"2018-10-11T14:51:00+01:00","created_at":"2018-10-11T14:51:00+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":175477,"price_min":175477,"price_max":175477,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301877989443,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton QUADRO - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton QUADRO - price per pair.","public_title":null,"options":["Default Title"],"price":175477,"weight":1000,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/92addd3c32d99697102bd9b89c0ad6f5.jpg?v=1539265861","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/6a120776254cd0dc88ef483ee168d607.gif?v=1539265861"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/92addd3c32d99697102bd9b89c0ad6f5.jpg?v=1539265861","options":["Title"],"content":"\u003cp\u003e\r\n\ta loudspeaker with a very high sensitivity rating\u003c\/p\u003e\r\n\u003cdiv align=\"center\"\u003e\r\n\t\u003cp style=\"TEXT-ALIGN: justify\"\u003e\r\n\t\t\u003cspan style=\"FONT-FAMILY: Arial\"\u003e\u003cfont size=\"2\"\u003eWhen the QUADRO was developed, the primary objective was to produce a loudspeaker with a very high sensitivity rating because the trend in recent times has been a retrograde one towards high-end tube amplifiers. However, these are often restricted to very low outputs of only a few watts. There are plenty of loudspeaker constructions which promise extremely high volume levels with only one watt but, on closer examination, are seen to produce that level only at medium and high frequencies. Extending the high sensitivity level to include low frequencies is indeed a challenge. To achieve that aim, it is crucial to include a very large diaphragm area which, in turn, requires a large sized cabinet if one wants decent bass volumes.\u003cbr\u003e\r\n\t\t\u003cbr\u003e\r\n\t\tThe generously sized enclosed QUADRO cabinet provides sufficient space for four of the excellent 200 6 Ohm fullrange loudspeakers to ensure that, even at the lower end of the bass frequency range, there is plenty of cone excursion. The drivers are closely bunched one above the other, which provides for an excellent radiation pattern: a broad angle in the horizontal plane and a relatively tightly bundled beam to top and bottom. To prevent the bundling effect becoming too strong in the vertical, all the drivers are powered in parallel in the bass frequencies and, as the frequency increases, the B 200 8 OHM s are phased out one after another so that, at very high frequencies, only the second driver from the bottom is working. The slightly tilted front bafflemeans that this full range loudspeaker is then aimed directly at ear height, assuming one is seated at least 3 metres from the speakers.\u003cbr\u003e\r\n\t\t\u003cbr\u003e\r\n\t\tAnyone with experience of the sound properties produced by the SOLO or SOLITUDE speakers will have a fairly clear idea of the clarity of sound produced by the QUADRO These qualities are, however, boosted by the fact that the air in the room is set in motion by a large diaphragm area but that force is hardly aimed at the floor or ceiling at all. A noticeable feature of the QUADRO are its clarity and analytical qualities, while, at the same time, not becoming obtrusive. The QUADRO may not be able to match the extremely deep bass output levels of the SOLITUDE for example, but that is in fact a positive feature in rooms that are not so large because the reverberating room resonance frequencies are not stimulated at all. However, the physically tangible kick-bass effect, a feature expected from musicians speakers, can indeed be produced if the amplifier is powerful enough. In addition, the QUADRO shows its strengths in the faithful reproduction of voices and recordings of large orchestras. It is fair to say, then that this is a good, all-round high-end loudspeaker.\u003c\/font\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n"}
Visaton QUADRO - price per pair.

Visaton QUADRO - price per pair.

£706.56 ex VAT
£2,105.72 inc VAT

a loudspeaker with a very high sensitivity rating When the QUADRO was developed, the primary objective was to produce a loudspeaker with a very high sensitivity rating because the trend in recent times has been a retrograde one towards high-end tube amplifiers. However, these are often restricted to very low outputs of only a few watt...


More Info
Visaton Pentaton BB - Price Per Pair

Visaton - Loudspeaker Kits & Accessories

£1,353.10 inc VAT
{"id":1676765036611,"title":"Visaton Pentaton BB - Price Per Pair","handle":"visaton-pentaton-bb-price-per-pair","description":"\u003cp\u003e\r\n\tFull-range loudspeakers are enjoying another comeback and arousing increased interest, embodying, as they do, everything that a point sound source should be. Large full-range loudspeakers like the B 200 have the additional characteristic of transmitting the sound in a tightly bundled beam, which produces a very tangible, three-dimensional effect and allows individual instruments to be easily located. A drawback of the system, however, is that this beaming process and the sensitivity are reduced at lower frequencies. The PENTATON BB was developed specifically as a cabinet based on the legendary B 200 but designed to compensate for these two disadvantages.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn a similar way to the QUADRO, additional full-range drivers are switched in to supplement the central driver, which is connected direct to the amplifier without an intervening filter, as the frequencies go down the scale. This allows the B 200 to develop its full potential with none of the impairments caused by frequency-dependent signal-carrying components, while the BG 20s, that are optimised for low-frequency response, maintain the extremely high sensitivity and beaming effect right down to the bass range. The additional full-range drivers are arranged symmetrically in two groups around the main speaker, which again creates an acoustic focus in the centre of the speaker cabinet. On top of this, the baffles in enclosures 2 and 4 and in enclosures 1 and 5 are angled inwards by 6° and 12° respectively. This feature guarantees that, assuming a typical listening distance of approx. 3 m, each of the drivers is exactly the same distance away from the ear and at the same angle. Given the size of these speaker cabinets, this is the only way to ensure that the phases of all the drivers are in sync across the entire frequency range.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe result of all these characteristics taken together is a sound image of the stage that could hardly be clearer or more precise. Even baritone male voices and large instruments such as the double bass or bassoon appear to be present full-size, in the right place on the virtual stage and in tangible 3D. Thanks to the enormous diaphragm area and the low moving mass, the PENTATON BB transforms dynamic jumps in the recording decisively and seamlessly into sound pressure and, with its superior handling, encourages the listener to increase the volume level until it is physically felt and yet it never becomes obtrusive or laboured.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAnd yet, this is definitely a speaker for connoisseurs of lower volumes. Even at low output levels, the overall sound quality is tangible and mature so that every tiny musical detail, however small, is projected audibly without the slightest distortion. The frequency response is remarkably linear for a loudspeaker of this kind, which is why the PENTATON BB is ideal for the authentic reproduction of every genre of music without restriction and will allow the listener to rediscover even old favourites thanks to its analytical and highly detailed approach.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThanks to its high sensitivity and uniform impedance curve, the PENTATON BB is predestined for use in connection with high-grade tube amplifiers with relatively low output wattages.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"1\" width=\"100%\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003cth colspan=\"2\"\u003e\r\n\t\t\t\tTechnical Data:\u003c\/th\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tRated power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t200 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tMaximum power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t350 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tNominal impedance Z\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t4 Ohm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tFrequency response\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t40-18000 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tMean sound pressure level\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t99 dB (2,83 V\/1 m)\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tCut-off frequency\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t1600 Hz \/ 9500 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tPrinciple of Housing\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\tgeschlossen \/ closed\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tNet volume\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t200 l (38 l + 2 x 39 l + 2 x 42 l)\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension height\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t1557 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension width\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t315 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension depth\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\tmax. 634 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cimg alt=\"\" src=\"http:\/\/www.visaton.com\/bilder\/frequenz\/gross\/PentatonBB_fs.gif\"\u003e\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:58:56+01:00","created_at":"2018-10-11T14:58:56+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":112758,"price_min":112758,"price_max":112758,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15302319571011,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton Pentaton BB - Price Per Pair","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton Pentaton BB - Price Per Pair","public_title":null,"options":["Default Title"],"price":112758,"weight":1000,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/b20f913fca484d6338b9d6f0413bd344.jpg?v=1539266336"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/b20f913fca484d6338b9d6f0413bd344.jpg?v=1539266336","options":["Title"],"content":"\u003cp\u003e\r\n\tFull-range loudspeakers are enjoying another comeback and arousing increased interest, embodying, as they do, everything that a point sound source should be. Large full-range loudspeakers like the B 200 have the additional characteristic of transmitting the sound in a tightly bundled beam, which produces a very tangible, three-dimensional effect and allows individual instruments to be easily located. A drawback of the system, however, is that this beaming process and the sensitivity are reduced at lower frequencies. The PENTATON BB was developed specifically as a cabinet based on the legendary B 200 but designed to compensate for these two disadvantages.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIn a similar way to the QUADRO, additional full-range drivers are switched in to supplement the central driver, which is connected direct to the amplifier without an intervening filter, as the frequencies go down the scale. This allows the B 200 to develop its full potential with none of the impairments caused by frequency-dependent signal-carrying components, while the BG 20s, that are optimised for low-frequency response, maintain the extremely high sensitivity and beaming effect right down to the bass range. The additional full-range drivers are arranged symmetrically in two groups around the main speaker, which again creates an acoustic focus in the centre of the speaker cabinet. On top of this, the baffles in enclosures 2 and 4 and in enclosures 1 and 5 are angled inwards by 6° and 12° respectively. This feature guarantees that, assuming a typical listening distance of approx. 3 m, each of the drivers is exactly the same distance away from the ear and at the same angle. Given the size of these speaker cabinets, this is the only way to ensure that the phases of all the drivers are in sync across the entire frequency range.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe result of all these characteristics taken together is a sound image of the stage that could hardly be clearer or more precise. Even baritone male voices and large instruments such as the double bass or bassoon appear to be present full-size, in the right place on the virtual stage and in tangible 3D. Thanks to the enormous diaphragm area and the low moving mass, the PENTATON BB transforms dynamic jumps in the recording decisively and seamlessly into sound pressure and, with its superior handling, encourages the listener to increase the volume level until it is physically felt and yet it never becomes obtrusive or laboured.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tAnd yet, this is definitely a speaker for connoisseurs of lower volumes. Even at low output levels, the overall sound quality is tangible and mature so that every tiny musical detail, however small, is projected audibly without the slightest distortion. The frequency response is remarkably linear for a loudspeaker of this kind, which is why the PENTATON BB is ideal for the authentic reproduction of every genre of music without restriction and will allow the listener to rediscover even old favourites thanks to its analytical and highly detailed approach.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThanks to its high sensitivity and uniform impedance curve, the PENTATON BB is predestined for use in connection with high-grade tube amplifiers with relatively low output wattages.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"1\" width=\"100%\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003cth colspan=\"2\"\u003e\r\n\t\t\t\tTechnical Data:\u003c\/th\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tRated power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t200 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tMaximum power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t350 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tNominal impedance Z\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t4 Ohm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tFrequency response\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t40-18000 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tMean sound pressure level\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t99 dB (2,83 V\/1 m)\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tCut-off frequency\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t1600 Hz \/ 9500 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tPrinciple of Housing\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\tgeschlossen \/ closed\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tNet volume\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t200 l (38 l + 2 x 39 l + 2 x 42 l)\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension height\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t1557 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension width\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\t315 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\"\u003e\r\n\t\t\t\u003ctd align=\"left\"\u003e\r\n\t\t\t\tOuter dimension depth\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\"\u003e\r\n\t\t\t\tmax. 634 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cimg alt=\"\" src=\"http:\/\/www.visaton.com\/bilder\/frequenz\/gross\/PentatonBB_fs.gif\"\u003e\u003c\/p\u003e\r\n"}
Visaton Pentaton BB - Price Per Pair

Visaton Pentaton BB - Price Per Pair

£1,754.77 ex VAT
£1,353.10 inc VAT

Full-range loudspeakers are enjoying another comeback and arousing increased interest, embodying, as they do, everything that a point sound source should be. Large full-range loudspeakers like the B 200 have the additional characteristic of transmitting the sound in a tightly bundled beam, which produces a very tangible, three-dimensional eff...


More Info
Visaton Nobox - price per pair.

Visaton - Loudspeaker Kits & Accessories

£984.91 inc VAT
{"id":1676722831427,"title":"Visaton Nobox - price per pair.","handle":"visaton-nobox-price-per-pair","description":"\u003cp\u003e\r\n\tThe NoBox BB unites a number of preferences in a single concept: it achieves the directness of a full-range loudspeaker, in particular in the voice range, and also manages to produce powerful, stable bass without having to fill the room with hardware.\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe NoBox BB unites a number of preferences in a single concept: it achieves the directness of a full-range loudspeaker, in particular in the voice range, and also manages to produce powerful, stable bass without having to fill the room with hardware. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe B 200 6 Ohm is used in the NoBox BB together with a 38 cm BGS 40 8 Ohm woofer in an open baffle as a dipole. The electric separation between the two drivers is low enough (250 Hz), which enables the full-range speaker to make full use of its capabilities and the BGS 40 8 Ohm is effectively the supporting woofer. The BGS 40 8 Ohm is a musician's driver with high sensitivity and can, as a result, easily be adapted to the B 200 6 Ohm without giving anything away in terms of mean sound pressure. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tDespite the baffle being open, which theoretically causes an acoustic short circuit in the bass range, the system produces a dynamic low bass output down to 32 Hz (-10 dB). One reason for this is that the baffle is cut off from the floor and so no acoustic short circuit can take place in this direction. In addition, the side panels of the cabinet, which are mainly for stability, increase the acoustic distance travelled\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eSimilar products \u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tQUADRO SOLITUDE \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSOLO 100 SOLO 20 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSOLO 50 SOLO Eckbox \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe panels are cut to size and glued together as shown in the drawing. The crossover can be attached to the rear of the baffle between the loudspeakers, for example, or on the base. The terminal connections are fitted to the vertical panel attached to the base. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tProposal 2 is more complicated. The edges are embellished with solid wood strips. In addition, a grille frame is included so that the entire front can be covered with fabric (please order separately). The frame is simply forced between the side pieces. The woofer should be recessed by 10 mm so that it does not touch the fabric. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIf critical tube amplifiers are used, the impedance curve should be made more linear (see circuit diagram). The components are mounted on a separate PCB as shown in the circuit diagram and connected upstream of the input to the NoBox BB crossover. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eComponent parts list for 1 box\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe kit includes all the components listed here but not the cabinet.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tCabinets and ready-made speaker can be ordered from www.vc-mailorderservice.de . \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFullrange speaker B 200 6 Ohm 1 piece \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tWoofer BGS 40 8 Ohm 1 piece \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tTerminal ST 77 1 piece \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tCrossover Crossover NoBox BB \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tWood screws 5 x 30 mm 8 pieces \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tWood screws 4 x 25 mm 6 pieces \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tCable 2 x 2.5 mm2 1.5 m \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t................ \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCabinet parts list for 1 box\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tParts Size (mm) Quantity \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tVersion 1: \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tMaterial: 19 mm chipboard or MDF \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFront panel 1210 x 500 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tBottom panel 325 x 500 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSide panels 1216 x 355 2 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tPanel for terminal 150 x 150 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tVersion 2: \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tMaterial: 19 mm chipboard or MDF \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFront panel 1210 x 512 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tBottom panel 315 x 500 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSide panels 1186 x 295 2 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tPanel for terminal 150 x 150 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tMaterial: Wood strips \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tEdges 1220 x 30 x 30 4 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tUpper edges 143 x 30 x 30 2 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tMaterial: 10 mm MDF \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFrame 1210 x 498 1\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:44:38+01:00","created_at":"2018-10-11T14:44:38+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":82076,"price_min":82076,"price_max":82076,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301603983427,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton Nobox - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton Nobox - price per pair.","public_title":null,"options":["Default Title"],"price":82076,"weight":999990,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/578224c205b7b317317d3acea304c4dd.jpg?v=1539265479","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/4d9478d738fae80b9bb2bb297a2d5205.gif?v=1539265479","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/0ea3cc133ec05e18a118d2fc01d23b73.gif?v=1539265479","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/3ea939401ff2c21399c4966306f30419.gif?v=1539265479"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/578224c205b7b317317d3acea304c4dd.jpg?v=1539265479","options":["Title"],"content":"\u003cp\u003e\r\n\tThe NoBox BB unites a number of preferences in a single concept: it achieves the directness of a full-range loudspeaker, in particular in the voice range, and also manages to produce powerful, stable bass without having to fill the room with hardware.\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe NoBox BB unites a number of preferences in a single concept: it achieves the directness of a full-range loudspeaker, in particular in the voice range, and also manages to produce powerful, stable bass without having to fill the room with hardware. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe B 200 6 Ohm is used in the NoBox BB together with a 38 cm BGS 40 8 Ohm woofer in an open baffle as a dipole. The electric separation between the two drivers is low enough (250 Hz), which enables the full-range speaker to make full use of its capabilities and the BGS 40 8 Ohm is effectively the supporting woofer. The BGS 40 8 Ohm is a musician's driver with high sensitivity and can, as a result, easily be adapted to the B 200 6 Ohm without giving anything away in terms of mean sound pressure. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tDespite the baffle being open, which theoretically causes an acoustic short circuit in the bass range, the system produces a dynamic low bass output down to 32 Hz (-10 dB). One reason for this is that the baffle is cut off from the floor and so no acoustic short circuit can take place in this direction. In addition, the side panels of the cabinet, which are mainly for stability, increase the acoustic distance travelled\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eSimilar products \u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tQUADRO SOLITUDE \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSOLO 100 SOLO 20 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSOLO 50 SOLO Eckbox \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe panels are cut to size and glued together as shown in the drawing. The crossover can be attached to the rear of the baffle between the loudspeakers, for example, or on the base. The terminal connections are fitted to the vertical panel attached to the base. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tProposal 2 is more complicated. The edges are embellished with solid wood strips. In addition, a grille frame is included so that the entire front can be covered with fabric (please order separately). The frame is simply forced between the side pieces. The woofer should be recessed by 10 mm so that it does not touch the fabric. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIf critical tube amplifiers are used, the impedance curve should be made more linear (see circuit diagram). The components are mounted on a separate PCB as shown in the circuit diagram and connected upstream of the input to the NoBox BB crossover. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eComponent parts list for 1 box\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe kit includes all the components listed here but not the cabinet.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tCabinets and ready-made speaker can be ordered from www.vc-mailorderservice.de . \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFullrange speaker B 200 6 Ohm 1 piece \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tWoofer BGS 40 8 Ohm 1 piece \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tTerminal ST 77 1 piece \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tCrossover Crossover NoBox BB \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tWood screws 5 x 30 mm 8 pieces \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tWood screws 4 x 25 mm 6 pieces \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tCable 2 x 2.5 mm2 1.5 m \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t................ \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCabinet parts list for 1 box\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tParts Size (mm) Quantity \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tVersion 1: \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tMaterial: 19 mm chipboard or MDF \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFront panel 1210 x 500 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tBottom panel 325 x 500 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSide panels 1216 x 355 2 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tPanel for terminal 150 x 150 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tVersion 2: \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tMaterial: 19 mm chipboard or MDF \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFront panel 1210 x 512 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tBottom panel 315 x 500 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tSide panels 1186 x 295 2 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tPanel for terminal 150 x 150 1 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tMaterial: Wood strips \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tEdges 1220 x 30 x 30 4 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tUpper edges 143 x 30 x 30 2 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tMaterial: 10 mm MDF \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFrame 1210 x 498 1\u003c\/p\u003e\r\n"}
Visaton Nobox - price per pair.

Visaton Nobox - price per pair.

£1,127.58 ex VAT
£984.91 inc VAT

The NoBox BB unites a number of preferences in a single concept: it achieves the directness of a full-range loudspeaker, in particular in the voice range, and also manages to produce powerful, stable bass without having to fill the room with hardware.Characteristics and sound properties The NoBox BB unites a number of preferences in a si...


More Info
Visaton MONITOR 890 MK III - price per pair.

Visaton - Loudspeaker Kits & Accessories

£4,297.40 inc VAT
{"id":1676695928899,"title":"Visaton MONITOR 890 MK III - price per pair.","handle":"visaton-monitor-890-mk-iii-price-per-pair","description":"\u003cp\u003e\r\n\tThis is no ordinary loudspeaker! The combination of horn loaded midrange and tweeter give the sort of dynamics and immediacy normally experienced only at a live concert. The combination and special loading of the two 12 inch bass units give a bottom end tMONITOR 890 MK III \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5957 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIt is well-known that there are two types of loudspeakers: hi-fi speakers that produce the most accurate, unaltered sound possible, and disco or musician's speakers, where the top volume level is of the utmost importance. These volume levels are normally only possible with horns but these often cause coloration of the sound. The MONITOR 890 MK III was designed specifically to combine the best of both worlds. In the mid-range, we use a driver \u0026amp; horn unit which is so dynamic and produces such undistorted music, that many a horn-disparager has had to admit that this is simply unbelievably \"different\". Two excellent quality woofers, TIW 300 8 Ohm, mounted in the 180 litre vented cabinet, generate a bass sound pressure that is physically tangible, as you have experienced with concert speakers. Combined with the first-rate TL 16 H 8 Ohm high-range horn, we have created a loudspeaker system that breaks down the previously unbridgeable barrier between the hi-fi and the professional speaker. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe output levels of the mid-range driver and tweeter can be adjusted to the requirements of the locale using output controls. We recommend, initially at least, the following level settings: tweeter: -4 dB; mid-range: -4 dB. These can, of course, be adapted to suit the specific acoustics in the room and personal preferences. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThanks to the added impedance linearising unit in the crossover unit, the Monitor 890 MK III is now even better suited to use with critical amplifiers (e.g. tube amplifiers). \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThis octagonal cabinet looks more complicated than it really is. All the chamfers are cut at 22.5° except two (at 45°). When you set up the saw, it is best to cut fractionally over 22.5° to ensure that, on the outside, all the chamfers are really airtight. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFirst cut the required cut-outs in the boards, which have already been cut to size. The two circular ones for the bass loudspeakers, the square opening for the tunnel and the two for the level controller. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tNext, build the main body without the base and top. You will need plenty of sticky tape to hold the joints together when gluing the side panels. The parts for the tunnel, the four stiffeners on the side panels and the vertical stiffeners (50 mm wide) on the front baffle then need to be shaped to an exact fit. The base then has to be shaped to fit exactly in the completed main body, since it is hardly possible to build the body with millimetre accuracy. Next, glue the vertical stiffeners to the base and the stiffener between the baffle and the rear panel. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe top with its cut-out for the terminals for the high- to mid-range is then shaped to fit and glued in position. The two crossover circuit boards are attached to the rear panel opposite the lower bass speaker drivers. The wiring to the horns need not be heavier than 1.5 mm2. From the terminals to the circuit boards and to the woofers, use wires with a cross-section of 2.5 mm2. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe twin terminal unit for connecting the mid- to high-range horns is fitted in the square cut-out in the top. The two gold-coloured jumpers have to be removed to do this. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe mid-range horn is placed on top of the cabinet on its three straight-sided feet. The tweeter is mounted on the wooden base supplied and is placed on top of the mid-range horn, towards the rear. The position of the two horns is crucial to the acoustics and, for this reason, they should be positioned as shown in the drawings.\u003c\/p\u003e\r\n","published_at":"2018-10-11T14:40:58+01:00","created_at":"2018-10-11T14:40:58+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding"],"price":358117,"price_min":358117,"price_max":358117,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15301429952579,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton MONITOR 890 MK III - price per pair.","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton MONITOR 890 MK III - price per pair.","public_title":null,"options":["Default Title"],"price":358117,"weight":999990,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/730c2048d8b877d0b237ffddf0150971.jpg?v=1539265259","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/25e7d5d8e2b06412c0c332b936bd0a45.gif?v=1539265259","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/25069dd82f9e3a49a446e53aee069f9d.gif?v=1539265259","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/0c3ad89fef3e4cd18831a4d489881265.gif?v=1539265259"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/730c2048d8b877d0b237ffddf0150971.jpg?v=1539265259","options":["Title"],"content":"\u003cp\u003e\r\n\tThis is no ordinary loudspeaker! The combination of horn loaded midrange and tweeter give the sort of dynamics and immediacy normally experienced only at a live concert. The combination and special loading of the two 12 inch bass units give a bottom end tMONITOR 890 MK III \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tArt. No. 5957 \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eCharacteristics and sound properties\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tIt is well-known that there are two types of loudspeakers: hi-fi speakers that produce the most accurate, unaltered sound possible, and disco or musician's speakers, where the top volume level is of the utmost importance. These volume levels are normally only possible with horns but these often cause coloration of the sound. The MONITOR 890 MK III was designed specifically to combine the best of both worlds. In the mid-range, we use a driver \u0026amp; horn unit which is so dynamic and produces such undistorted music, that many a horn-disparager has had to admit that this is simply unbelievably \"different\". Two excellent quality woofers, TIW 300 8 Ohm, mounted in the 180 litre vented cabinet, generate a bass sound pressure that is physically tangible, as you have experienced with concert speakers. Combined with the first-rate TL 16 H 8 Ohm high-range horn, we have created a loudspeaker system that breaks down the previously unbridgeable barrier between the hi-fi and the professional speaker. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe output levels of the mid-range driver and tweeter can be adjusted to the requirements of the locale using output controls. We recommend, initially at least, the following level settings: tweeter: -4 dB; mid-range: -4 dB. These can, of course, be adapted to suit the specific acoustics in the room and personal preferences. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThanks to the added impedance linearising unit in the crossover unit, the Monitor 890 MK III is now even better suited to use with critical amplifiers (e.g. tube amplifiers). \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cb\u003eConstruction\u003c\/b\u003e \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThis octagonal cabinet looks more complicated than it really is. All the chamfers are cut at 22.5° except two (at 45°). When you set up the saw, it is best to cut fractionally over 22.5° to ensure that, on the outside, all the chamfers are really airtight. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFirst cut the required cut-outs in the boards, which have already been cut to size. The two circular ones for the bass loudspeakers, the square opening for the tunnel and the two for the level controller. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tNext, build the main body without the base and top. You will need plenty of sticky tape to hold the joints together when gluing the side panels. The parts for the tunnel, the four stiffeners on the side panels and the vertical stiffeners (50 mm wide) on the front baffle then need to be shaped to an exact fit. The base then has to be shaped to fit exactly in the completed main body, since it is hardly possible to build the body with millimetre accuracy. Next, glue the vertical stiffeners to the base and the stiffener between the baffle and the rear panel. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe top with its cut-out for the terminals for the high- to mid-range is then shaped to fit and glued in position. The two crossover circuit boards are attached to the rear panel opposite the lower bass speaker drivers. The wiring to the horns need not be heavier than 1.5 mm2. From the terminals to the circuit boards and to the woofers, use wires with a cross-section of 2.5 mm2. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe twin terminal unit for connecting the mid- to high-range horns is fitted in the square cut-out in the top. The two gold-coloured jumpers have to be removed to do this. \u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe mid-range horn is placed on top of the cabinet on its three straight-sided feet. The tweeter is mounted on the wooden base supplied and is placed on top of the mid-range horn, towards the rear. The position of the two horns is crucial to the acoustics and, for this reason, they should be positioned as shown in the drawings.\u003c\/p\u003e\r\n"}
Visaton MONITOR 890 MK III - price per pair.

Visaton MONITOR 890 MK III - price per pair.

£820.76 ex VAT
£4,297.40 inc VAT

This is no ordinary loudspeaker! The combination of horn loaded midrange and tweeter give the sort of dynamics and immediacy normally experienced only at a live concert. The combination and special loading of the two 12 inch bass units give a bottom end tMONITOR 890 MK III Art. No. 5957 Characteristics and sound properties I...


More Info
Visaton Grand Orgue - Price Per Pair

Visaton - Loudspeaker Kits & Accessories

£1,257.86 inc VAT
{"id":1676767035459,"title":"Visaton Grand Orgue - Price Per Pair","handle":"visaton-grand-orgue-price-per-pair","description":"\u003cp style=\"text-align: justify;\"\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThe toughest challenge for a high-end loudspeaker is to reproduce the lowest frequencies of larger instruments, such as an organ or double bass, with appropriate fidelity. Only very few speakers are at all able to reproduce the lowest register of a church organ and even then only the very best are able to make it sound as if it was coming from an organ pipe. To do credit to a double bass in all its glory without sounding fluffy or over-inflated or, even worse, giving up altogether, is the reserve of very few, outstanding loudspeaker constructions. The \"Les Orgues\" speaker series, in this case the GRAND ORGUE species, represent exactly that capability. With eight WS 25 E 8 Ohm woofers, optimised specifically as a free-air system, mounted in a folded, but open baffle, they are able to reproduce bass down to below 20 Hz in a most natural, unhurried and completely unexaggerated manner and with no sign of weakness. Since there is, in effect, no enclosure, the resonant frequency of the woofer is not increased, but in this case even decreased, which enables it to emanate clear, non-compressed extremely low frequencies. The precondition for this low-range bass imaging, which uses double-sided radiation, is, however, also to ensure the speakers are far enough away from the wall. One metre is sufficient, but for full power right to the bottom of the bass range, 2 - 3 metres is preferable.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tBut the effortless and unobtrusive deep bass is not all, by any means. The bass section, which radiates to both sides, is supplemented by a line array consisting of eight oval SL 713 4 Ohm full-range drivers. This moderately priced full-range loudspeaker is characterised by its extremely light paper diaphragm and the voice coil carrier made of kraft paper which, together, ensure absolutely natural sound right through to the highest frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tA key characteristic of line arrays is that they generate a highly focused sound beam in the vertical plane. Outside that main path, a large proportion of the signal is cancelled out by interference. This prevents reflections from the floor and ceiling from even coming into existence, which would impair the precise tridimensional imaging of the music. However this beaming effect is a direct function of the wavelength of the sound radiated. The higher the frequency, and, as a result, the shorter the wavelength, the more extreme the beaming effect. A large array such as we have here in the GRAND ORGUE would normally lead to very extreme beaming in the high-frequency range, which would not reflect the reality of the sound being played. To achieve as uniform a beaming effect as possible across the entire frequency range, which is important to guarantee balanced sound quality in the listening room, we have arranged for a correcting circuit within the array. This circuit ensures that, as the frequency increases, additional output is directed towards the second and third full-range drivers from the top while the output to the other six drivers is gradually reduced. In effect, the array is shortened across the full range steplessly from eight loudspeakers to two. These two loudspeakers should be as close as possible to ear height. If ear height should actually be higher or lower than the midpoint between the second and third full-range drivers from the top, the system can easily be adapted to the situation by wiring up the array in such a way that e.g. the third and fourth drivers from the top are responsible for the higher frequencies. In this way, the cabinet can be tuned in small steps to suit the real situation.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tCombining all these technical sophistications in a single cabinet results in an exceptional speaker system which is predestined for the \"natural\" reproduction of music, but not only for that. Whether it is a keenly picked guitar string, a crisp drum solo, an entire symphony orchestra including an uplifting, heart-warming string section and a powerful brass department, or the veritable queen of all instruments, the organ, it will all come across absolutely authentically, with dynamism and is guaranteed to give you goose pimples. In the same way, voices, male and female, are reproduced faithfully including every tiny detail. Each instrument and voice appear to be hovering in exactly the right place in space, the spatial quality is completely natural and everything is in the defined position.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tAnyone on the lookout for loudspeakers for high-quality music, who does not intend to make compromises in terms of frequency response and who is keen on extremely accurate imaging of the stage or orchestra pit, should take a close look at the GRAND ORGUE. The only preconditions are a powerful amplifier and generous distances between the cabinets and the walls to enable the GRAND ORGUE to develop its capabilities.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tHINT: The bass part of the GRAND ORGUE, on its own without the full-range drivers, connected directly up to an active source without a passive crossover, acts as an excellent subwoofer and can be used, either singly or as a pair, to support music-orientated high-end loudspeakers and full-range loudspeakers down to the lowest bass frequencies and give home theatres the bottom end that they deserve.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp style=\"font-size: 13px; color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif; background-color: rgb(238, 238, 238); \"\u003e\r\n\t\u003cstrong\u003eRequired accessories:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"font-family: Arial, Helvetica, sans-serif; background-color: rgb(238, 238, 238); \" width=\"100%\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\tthreaded rod M 6\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t16 pieces à 290 mm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\tcover nut M 6\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\tlarge washer M 6\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\tscrewed insert M 3\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\thexagon socket head screws M 3 x 10 mm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\t\u003cdiv\u003e\r\n\t\t\t\t\t \u003c\/div\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"1\" style=\"font-family: Arial, Helvetica, sans-serif; \" width=\"100%\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003cth colspan=\"2\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tTechnical Data:\u003c\/th\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tRated power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t200 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tMaximum power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t500 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tNominal impedance Z\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t4 Ohm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tFrequency response\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t16–28000 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tMean sound pressure level\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t81 dB (2,83 V\/1 m)\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tCut-off frequency\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t300 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tPrinciple of Housing\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tDipol, W-förmig gefaltete offene Schallwand\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tNet volume\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tentfällt, da offene Bauform\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tOuter dimension height\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t1200 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tOuter dimension width\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t276 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tOuter dimension depth\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t350 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tAlthough the GRAND ORGUE cabinet consists of many individual parts, it is, in fact, easy to build because all the parts have only 90° angles and there are no bevels required. The cabinet consists of two halves which are held together by 16 threaded rods after the drivers have been fitted. The split construction is necessary because it would not be possible to fit the woofers inside a closed cabinet. To ensure the two halves are properly positioned relative to each other, we recommend wooden plugs or a similar locating system.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tInitially, the construction of the two halves is identical. Glue the outer spacers and rear wall to the outer wall which has the cutout in it for the magnets. To this, glue the inner wall with the large cutouts for the woofer baskets. This completes part 2 of the cabinet. On part 1, we now glue the baffle and the rear wall for the full-range drivers in place and attach the inner spacers, which completes this part. If you intend to fit the full-range drivers from the back, as originally planned, we recommend you use screw-in nuts. These have to be screwed in before the baffle is glued in place because, afterwards, it is hardly possible to access them. Fitting the drivers from behind is mainly for appearance's sake. If you do not feel up to milling the oval cutouts exactly, you can also fit the drivers from the outside. In this case, however, we would recommend you fit a grille frame with acoustic fabric because the SL 713's basket is not particularly attractive.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tIt is also necessary to drill holes in the outer spacers, preferably before gluing together, to pass the wires through. The four woofers in each half of the cabinet are soldered in parallel, and these two groups then connected in series. This involves laying connecting wires between the enclosures and a connection from one of the halves to the other. For the full-range drivers, it is only necessary to drill a hole in the rear wall of the full-range enclosure.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tSince there is no room inside the cabinet for the crossover, it has to be placed outside. There are no limits to your imagination. You could make a wooden base for the speaker and hide it there or just use a wooden board and mount it on that so that it is visible. There is also hardly room for terminal connections, so you will need to improvise here, too. The gold-plated screw terminals on the BT 95\/75 (or from the HIGH-END-TERMINAL) can be unscrewed and fitted in the rear wall, which is an attractive solution in connection with the wood panelling. Alternatively, the wires can be fed straight from the driver to the crossover without an intermediate terminal.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tTo reduce the wiring to a minimum, the series capacitors (Elko Special 100 µF and MKT 47 µF), which are responsible for splitting the BB array (see above), can be housed in the full-range enclosure. They can be soldered onto the appropriate driver direct with short pieces of wire and placed in the bottom of the enclosure. Experience has shown that it makes sense to solder up all the eight full-range drivers including the series crossover while they are outside the cabinet and then to position the drivers and wiring in the cabinet afterwards. Soldering the wires on with the drivers already fitted would be far more complicated than outside the cabinet side by side on the table.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tHINT: After the whole construction has been glued together, tie the two halves firmly using the threaded rods but before you fit the drivers. At this stage it is possible to sand off any irregularities using an orbital sander so that the two halves match perfectly.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tInner damping\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFold two mats of damping material longways for each of the full-range parts of the cabinet and push them inside. No damping is required in the woofer enclosures.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tComponent parts list for 1 box\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe kit includes all the components listed here but not the cabinet.\u003cbr\u003e\r\n\tA complete kit for this suggestion is available via www.vc-mailorderservice.de.\u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"width:310px;\" width=\"310\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tFull-range speaker\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tSL 713 4 Ohm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t8 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tWoofer\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tWS 25 E 8 Ohm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t8 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tCrossover\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tGRAND ORGUE\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1 pc.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tTerminal\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tBT 95\/75\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1 pc.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tDamping material\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tpolyester wool\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1 bag\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tWood screws\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t4 x 20 mm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tcable\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t2 x 2,5 mm²\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t4 m\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tcable\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t2 x 1,5 mm²\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t4 m\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tCabinet parts list for 1 box\u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"width:310px;\" width=\"310\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tparts\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\tsize (mm)\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\tquantity\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd colspan=\"3\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tMaterial: 19 mm MDF or plywood\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\touter divider mid\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t331 x 54\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t6\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\touter divider top\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t350 x 54\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t4\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tvertical panels\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1200 x 350\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t4\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tinner divider mid\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t256 x 92\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t3\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tinner divider top\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t350 x 92\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t2\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\trear panels\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1162 x 54\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t2\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t \u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t \u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t \u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd colspan=\"3\" style=\"width:252px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tMaterial: 12 mm MDF or plywood\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tbaffle \u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1162 x 92\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t2\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n","published_at":"2018-10-11T14:59:41+01:00","created_at":"2018-10-11T14:59:42+01:00","vendor":"vendor-unknown","type":"Visaton - Loudspeaker Kits \u0026 Accessories","tags":["Type_Large Floorstanding","Visaton - Loudspeaker Kits \u0026 Accessories: Large floorstanding","Visaton Grand Orgue"],"price":104822,"price_min":104822,"price_max":104822,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15302361120835,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Visaton Grand Orgue","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Visaton Grand Orgue - Price Per Pair","public_title":null,"options":["Default Title"],"price":104822,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/60d15bdc26346816e55023ca11b55298.jpg?v=1539266382","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/d6478d7019aba1852a35320c1526c48b.gif?v=1539266382","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/c10177bb1df375ec0de225c8cdad2826.gif?v=1539266382","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/caf150e9517d0caf3baade5e4ee7688c.gif?v=1539266382","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/089810e8b4b5712b13ff5d2226b8235b.gif?v=1539266382","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/060eb4e112db09d4d39ab005df039e16.jpg?v=1539266382","\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/c9efa93f0e98667e91f1c8db597a31cb.gif?v=1539266382"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0055\/3592\/4291\/products\/60d15bdc26346816e55023ca11b55298.jpg?v=1539266382","options":["Title"],"content":"\u003cp style=\"text-align: justify;\"\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThe toughest challenge for a high-end loudspeaker is to reproduce the lowest frequencies of larger instruments, such as an organ or double bass, with appropriate fidelity. Only very few speakers are at all able to reproduce the lowest register of a church organ and even then only the very best are able to make it sound as if it was coming from an organ pipe. To do credit to a double bass in all its glory without sounding fluffy or over-inflated or, even worse, giving up altogether, is the reserve of very few, outstanding loudspeaker constructions. The \"Les Orgues\" speaker series, in this case the GRAND ORGUE species, represent exactly that capability. With eight WS 25 E 8 Ohm woofers, optimised specifically as a free-air system, mounted in a folded, but open baffle, they are able to reproduce bass down to below 20 Hz in a most natural, unhurried and completely unexaggerated manner and with no sign of weakness. Since there is, in effect, no enclosure, the resonant frequency of the woofer is not increased, but in this case even decreased, which enables it to emanate clear, non-compressed extremely low frequencies. The precondition for this low-range bass imaging, which uses double-sided radiation, is, however, also to ensure the speakers are far enough away from the wall. One metre is sufficient, but for full power right to the bottom of the bass range, 2 - 3 metres is preferable.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tBut the effortless and unobtrusive deep bass is not all, by any means. The bass section, which radiates to both sides, is supplemented by a line array consisting of eight oval SL 713 4 Ohm full-range drivers. This moderately priced full-range loudspeaker is characterised by its extremely light paper diaphragm and the voice coil carrier made of kraft paper which, together, ensure absolutely natural sound right through to the highest frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tA key characteristic of line arrays is that they generate a highly focused sound beam in the vertical plane. Outside that main path, a large proportion of the signal is cancelled out by interference. This prevents reflections from the floor and ceiling from even coming into existence, which would impair the precise tridimensional imaging of the music. However this beaming effect is a direct function of the wavelength of the sound radiated. The higher the frequency, and, as a result, the shorter the wavelength, the more extreme the beaming effect. A large array such as we have here in the GRAND ORGUE would normally lead to very extreme beaming in the high-frequency range, which would not reflect the reality of the sound being played. To achieve as uniform a beaming effect as possible across the entire frequency range, which is important to guarantee balanced sound quality in the listening room, we have arranged for a correcting circuit within the array. This circuit ensures that, as the frequency increases, additional output is directed towards the second and third full-range drivers from the top while the output to the other six drivers is gradually reduced. In effect, the array is shortened across the full range steplessly from eight loudspeakers to two. These two loudspeakers should be as close as possible to ear height. If ear height should actually be higher or lower than the midpoint between the second and third full-range drivers from the top, the system can easily be adapted to the situation by wiring up the array in such a way that e.g. the third and fourth drivers from the top are responsible for the higher frequencies. In this way, the cabinet can be tuned in small steps to suit the real situation.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tCombining all these technical sophistications in a single cabinet results in an exceptional speaker system which is predestined for the \"natural\" reproduction of music, but not only for that. Whether it is a keenly picked guitar string, a crisp drum solo, an entire symphony orchestra including an uplifting, heart-warming string section and a powerful brass department, or the veritable queen of all instruments, the organ, it will all come across absolutely authentically, with dynamism and is guaranteed to give you goose pimples. In the same way, voices, male and female, are reproduced faithfully including every tiny detail. Each instrument and voice appear to be hovering in exactly the right place in space, the spatial quality is completely natural and everything is in the defined position.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tAnyone on the lookout for loudspeakers for high-quality music, who does not intend to make compromises in terms of frequency response and who is keen on extremely accurate imaging of the stage or orchestra pit, should take a close look at the GRAND ORGUE. The only preconditions are a powerful amplifier and generous distances between the cabinets and the walls to enable the GRAND ORGUE to develop its capabilities.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tHINT: The bass part of the GRAND ORGUE, on its own without the full-range drivers, connected directly up to an active source without a passive crossover, acts as an excellent subwoofer and can be used, either singly or as a pair, to support music-orientated high-end loudspeakers and full-range loudspeakers down to the lowest bass frequencies and give home theatres the bottom end that they deserve.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp style=\"font-size: 13px; color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif; background-color: rgb(238, 238, 238); \"\u003e\r\n\t\u003cstrong\u003eRequired accessories:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"font-family: Arial, Helvetica, sans-serif; background-color: rgb(238, 238, 238); \" width=\"100%\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\tthreaded rod M 6\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t16 pieces à 290 mm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\tcover nut M 6\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\tlarge washer M 6\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\tscrewed insert M 3\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\thexagon socket head screws M 3 x 10 mm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\u003cp align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\t\u003cdiv\u003e\r\n\t\t\t\t\t \u003c\/div\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"1\" style=\"font-family: Arial, Helvetica, sans-serif; \" width=\"100%\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003cth colspan=\"2\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tTechnical Data:\u003c\/th\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tRated power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t200 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tMaximum power\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t500 W\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tNominal impedance Z\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t4 Ohm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tFrequency response\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t16–28000 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tMean sound pressure level\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t81 dB (2,83 V\/1 m)\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tCut-off frequency\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t300 Hz\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tPrinciple of Housing\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tDipol, W-förmig gefaltete offene Schallwand\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tNet volume\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tentfällt, da offene Bauform\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tOuter dimension height\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t1200 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tOuter dimension width\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t276 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr class=\"techdat\" style=\"background-color: rgb(238, 238, 238); \"\u003e\r\n\t\t\t\u003ctd align=\"left\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\tOuter dimension depth\u003c\/td\u003e\r\n\t\t\t\u003ctd align=\"right\" style=\"font-size: 10pt; \"\u003e\r\n\t\t\t\t350 mm\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tAlthough the GRAND ORGUE cabinet consists of many individual parts, it is, in fact, easy to build because all the parts have only 90° angles and there are no bevels required. The cabinet consists of two halves which are held together by 16 threaded rods after the drivers have been fitted. The split construction is necessary because it would not be possible to fit the woofers inside a closed cabinet. To ensure the two halves are properly positioned relative to each other, we recommend wooden plugs or a similar locating system.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tInitially, the construction of the two halves is identical. Glue the outer spacers and rear wall to the outer wall which has the cutout in it for the magnets. To this, glue the inner wall with the large cutouts for the woofer baskets. This completes part 2 of the cabinet. On part 1, we now glue the baffle and the rear wall for the full-range drivers in place and attach the inner spacers, which completes this part. If you intend to fit the full-range drivers from the back, as originally planned, we recommend you use screw-in nuts. These have to be screwed in before the baffle is glued in place because, afterwards, it is hardly possible to access them. Fitting the drivers from behind is mainly for appearance's sake. If you do not feel up to milling the oval cutouts exactly, you can also fit the drivers from the outside. In this case, however, we would recommend you fit a grille frame with acoustic fabric because the SL 713's basket is not particularly attractive.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tIt is also necessary to drill holes in the outer spacers, preferably before gluing together, to pass the wires through. The four woofers in each half of the cabinet are soldered in parallel, and these two groups then connected in series. This involves laying connecting wires between the enclosures and a connection from one of the halves to the other. For the full-range drivers, it is only necessary to drill a hole in the rear wall of the full-range enclosure.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tSince there is no room inside the cabinet for the crossover, it has to be placed outside. There are no limits to your imagination. You could make a wooden base for the speaker and hide it there or just use a wooden board and mount it on that so that it is visible. There is also hardly room for terminal connections, so you will need to improvise here, too. The gold-plated screw terminals on the BT 95\/75 (or from the HIGH-END-TERMINAL) can be unscrewed and fitted in the rear wall, which is an attractive solution in connection with the wood panelling. Alternatively, the wires can be fed straight from the driver to the crossover without an intermediate terminal.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tTo reduce the wiring to a minimum, the series capacitors (Elko Special 100 µF and MKT 47 µF), which are responsible for splitting the BB array (see above), can be housed in the full-range enclosure. They can be soldered onto the appropriate driver direct with short pieces of wire and placed in the bottom of the enclosure. Experience has shown that it makes sense to solder up all the eight full-range drivers including the series crossover while they are outside the cabinet and then to position the drivers and wiring in the cabinet afterwards. Soldering the wires on with the drivers already fitted would be far more complicated than outside the cabinet side by side on the table.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tHINT: After the whole construction has been glued together, tie the two halves firmly using the threaded rods but before you fit the drivers. At this stage it is possible to sand off any irregularities using an orbital sander so that the two halves match perfectly.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tInner damping\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tFold two mats of damping material longways for each of the full-range parts of the cabinet and push them inside. No damping is required in the woofer enclosures.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tComponent parts list for 1 box\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tThe kit includes all the components listed here but not the cabinet.\u003cbr\u003e\r\n\tA complete kit for this suggestion is available via www.vc-mailorderservice.de.\u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"width:310px;\" width=\"310\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tFull-range speaker\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tSL 713 4 Ohm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t8 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tWoofer\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tWS 25 E 8 Ohm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t8 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tCrossover\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tGRAND ORGUE\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1 pc.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tTerminal\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tBT 95\/75\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1 pc.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tDamping material\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tpolyester wool\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1 bag\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tWood screws\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t4 x 20 mm\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t32 pcs.\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tcable\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t2 x 2,5 mm²\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t4 m\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tcable\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t2 x 1,5 mm²\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t4 m\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tCabinet parts list for 1 box\u003c\/p\u003e\r\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"width:310px;\" width=\"310\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tparts\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\tsize (mm)\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\tquantity\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd colspan=\"3\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tMaterial: 19 mm MDF or plywood\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\touter divider mid\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t331 x 54\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t6\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\touter divider top\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t350 x 54\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t4\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tvertical panels\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1200 x 350\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t4\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tinner divider mid\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t256 x 92\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t3\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tinner divider top\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t350 x 92\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t2\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\trear panels\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1162 x 54\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t2\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t \u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t \u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\t \u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd colspan=\"3\" style=\"width:252px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tMaterial: 12 mm MDF or plywood\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd style=\"width:171px;\"\u003e\r\n\t\t\t\t\u003cp\u003e\r\n\t\t\t\t\tbaffle \u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd style=\"width:81px;\"\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t1162 x 92\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\r\n\t\t\t\t\u003cp align=\"right\"\u003e\r\n\t\t\t\t\t2\u003c\/p\u003e\r\n\t\t\t\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n"}
Visaton Grand Orgue - Price Per Pair

Visaton Grand Orgue - Price Per Pair

£3,581.17 ex VAT
£1,257.86 inc VAT

The toughest challenge for a high-end loudspeaker is to reproduce the lowest frequencies of larger instruments, such as an organ or double bass, with appropriate fidelity. Only very few speakers are at all able to reproduce the lowest register of a church organ and even then only the very best are able to make it sound as if it was comi...


More Info