Visaton W 170 S 8 Ohm, 6.5 Inch, HiFi Woofer
Product photo · Enlarge image
Product photo
Rear view and connections
Dimension drawing
Response and impedance
Directivity pattern
Product photographs and manufacturer drawings. Images are not to scale.
Quantity discounts
Buying in quantity?
Contact us with the quantity you need and we can discuss pricing for your order.
Request a quantity quoteDescription
The W 170 S is a hi-fi woofer designed for long cone excursions, with a coated paper cone, a powerful motor with an extended rear pole plate and a special voice coil and elastic rubber surround to suit the travel. This 8 Ω version handles 50 W rated power, has an excursion limit of ±10 mm and a d.c. resistance of 5.9 Ω.
Typical applications
- Two-way hi-fi speakers
- Three-way hi-fi speakers (bass/midrange)
Full specifications
| Rated power | 50 W |
|---|---|
| Maximum power | 80 W |
| Nominal impedance | 8 Ω |
| Frequency response (−10 dB) | fu–8000 Hz (fu: lower cut-off depends on the cabinet) |
| Mean sound pressure level | 86 dB (1 W/1 m) |
| Opening angle (-6 dB) | 72°/4000 Hz |
| Excursion limit | ±10 mm |
| Resonance frequency fs | 36 Hz (datasheet: 40 Hz) |
| Magnetic induction | 1.0 T |
| Magnetic flux | 314 µWb |
| Height of front pole-plate | 4 mm |
| Voice coil diameter | 25 mm |
| Height of winding | 12.5 mm |
| Cut-out | 148 mm |
| Net weight | 1.1 kg |
| D.C. resistance Rdc | 5.9 Ω |
| Mechanical Q factor Qms | 2.43 |
| Electrical Q factor Qes | 0.66 |
| Total Q factor Qts | 0.52 |
| Equivalent volume Vas | 38 l |
| Effective piston area Sd | 129 cm² |
| Dynamically moved mass Mms | 13 g |
| Force factor Bxl | 5.4 Tm |
| Inductance of the voice coil L | 1.2 mH |
| Terminals | 4.8 x 0.8 mm (+)/2.8 x 0.8 mm (-) |
| Temperature range | −20 to 70 °C |
Dimensions and drawings

Dimension drawing · Open original image
Installation and cabinet guidance
Allow a 148 mm cut-out for a frame that measures 187.3 mm across, with the fixing holes on a 175.8 mm circle for 4.4 mm screws; mark the hole positions from the driver itself before drilling. Behind the baffle allow about 74 mm of clear depth for the basket and its 80 mm magnet, with room beyond that for the terminals and the wiring.
Fit it to a rigid baffle with a continuous gasket or sealing strip between the frame and the panel, and tighten the fixings evenly and only enough to seal so the frame is not pulled out of shape. Check that the cone and the rubber surround stay clear of the grille and of any internal bracing. It is made for long strokes, so allow for the ±10 mm excursion limit when siting a grille or fascia.
The terminals take 4.8 x 0.8 mm blades on the positive side and 2.8 x 0.8 mm on the negative, so blade size identifies polarity. Use matching push-on connectors, observe polarity, insulate the joints and keep the wiring clear of the moving parts, and choose an amplifier or crossover suited to the 8 Ω load.
Confirm the closed-box volume and tuning before construction. Visaton's published bass-reflex suggestions for this driver: 20 l bass reflex with one BR 19.24 port cut to 14 cm (fb 44 Hz); 30 l bass reflex with one BR 15.34 port cut to 12 cm (fb 39 Hz); 50 l bass reflex with a BR 15.34 port (fb 33 Hz).
Related Products
Part no. 9046
Visaton W 165 A 2 Ohm, 6.5 Inch, Weatherproof Woofer
Part no. 2001
Visaton FRS 8 M 8 Ohm, 3.3 Inch, HiFi Full Range Speaker
Part no. 9089
Visaton M 10 8 Ohm, 4 Inch, HiFi Midrange Driver
Part no. 1055
Visaton WS 17 E 8 Ohm, 6.5 Inch, HiFi Woofer
Part no. 1054