Visaton R 10 SC 4 Ohm, 4 Inch, Full Range Speaker
Product photo · Enlarge image
Product photographs and manufacturer drawings. Images are not to scale.
Quantity discounts
Buying in quantity?
Contact us with the quantity you need and we can discuss pricing for your order.
Request a quantity quoteDescription
The R 10 SC adds magnetic shielding, a water-repellent cone and a rubber gasket to the efficient R 10 S design, so it can sit close to screens and cope with damp or cold conditions. This 4 Ω version handles 20 W rated power and suits control speakers, public-address and public transport systems.
Typical applications
- Video monitoring screens
- Equipment monitoring
- Ceiling speakers in rail vehicles and buses
- Public-address and transport systems
Full specifications
| Rated power | 20 W |
|---|---|
| Maximum power | 30 W |
| Nominal impedance | 4 Ω |
| Frequency response (−10 dB) | 100–13000 Hz |
| Mean sound pressure level | 90 dB (1 W/1 m) |
| Opening angle (-6 dB) | 92°/4000 Hz |
| Excursion limit | ±1.5 mm |
| Resonance frequency fs | 165 Hz |
| Magnetic induction | 0.95 T |
| Magnetic flux | 135 µWb |
| Height of front pole-plate | 3 mm |
| Voice coil diameter | 15 mm |
| Height of winding | 4 mm |
| Cut-out | 93 mm |
| Net weight | 0.24 kg |
| D.C. resistance Rdc | 3.6 Ω |
| Mechanical Q factor Qms | 6.4 |
| Electrical Q factor Qes | 1.67 |
| Total Q factor Qts | 1.32 |
| Equivalent volume Vas | 2.6 l |
| Effective piston area Sd | 56 cm² |
| Dynamically moved mass Mms | 1.9 g |
| Force factor Bxl | 2 T m |
| Inductance of the voice coil L | 0.2 mH |
| Terminals | 5.2 x 0.5 mm (+)/2.8 x 0.5 mm (-) |
| Protective system | IP64 — front side in a sealed enclosure |
| Temperature range | −40 to 70 °C |
Dimensions and drawings

Dimension drawing · Open original image
Installation and cabinet guidance
Allow for a 93 mm panel opening and a 102 mm square frame with four 5 x 6.9 mm fixing slots. Leave about 44 mm behind the panel for the shielded magnet assembly, terminals and wiring.
Seat the rubber gasket evenly against a flat panel so the front-side protection is effective; the IP rating applies only to the front when the driver is built into a sealed enclosure.
Use connectors that fit the 5.2 x 0.5 mm positive and 2.8 x 0.5 mm negative blade terminals. Use an amplifier suitable for the 4 Ω load and observe terminal polarity. For a 100 V line system, connect through a suitable line transformer; do not connect the driver directly to the line.
Optional protective grilles for 10 cm drivers are available; match the grille to the panel finish and check its fixing pattern against the frame before drilling.
Related Products
Part number 1301
Visaton AL 130 8 Ohm, 5 Inch, High-End Midrange Driver
Part number 1305
Visaton AL 130 M 8 Ohm, 5 Inch, High-End Midrange Driver
Part number 1302
Visaton AL 170 8 Ohm, 6.5 Inch, High-End Midrange Driver
Part number 1281
Visaton AL 200 8 Ohm, 8 Inch, High-End Woofer
Part number 1263
Visaton B 100 6 Ohm, 4 Inch, High-End Full Range Speaker
Part number 1350
Visaton B 200 6 Ohm, 8 Inch, High-End Full Range Speaker
Part number 1261
Visaton B 80 8 Ohm, 3.3 Inch, High-End Full Range Speaker
Part number 2530
Visaton BF 30 R 4 Ohm, 1.2 Inch, Full Range Miniature Speaker
Part number 2243
Visaton BF 32 4 Ohm, 1.3 Inch, Full Range Miniature Speaker
Part number 2242
Visaton BF 32 8 Ohm, 1.3 Inch, Full Range Miniature Speaker
Part number 2249
Visaton BF 32 S 4 Ohm, 1.3 Inch, Full Range Speaker
Part number 2247