Visaton W 200 S 4 Ohm, 8 Inch, HiFi Woofer
Product photo · Enlarge image
Product photo
Rear view and connections (8 Ω version shown)
Dimension drawing
Response and impedance
Directivity pattern
Product photographs and manufacturer drawings. Images are not to scale.
Quantity discounts
Buying in quantity?
Contact us with the quantity you need and we can discuss pricing for your order.
Request a quantity quoteDescription
The W 200 S is a 20 cm hi-fi woofer with a strong motor, an extended rear pole plate and a 35 mm voice coil for high power handling, working through a coated paper cone on an elastic rubber surround. This 4 Ω version takes 75 W rated power, has a d.c. resistance of 3.4 Ω and an excursion limit of ±10 mm.
Typical applications
- Two-way hi-fi speakers
- Three-way hi-fi speakers (bass/midrange)
- Large multi-way speaker systems
Full specifications
| Rated power | 75 W |
|---|---|
| Maximum power | 115 W |
| Nominal impedance | 4 Ω |
| Frequency response (−10 dB) | fu–6000 Hz (fu: lower cut-off depends on the cabinet) |
| Mean sound pressure level | 88 dB (1 W/1 m) |
| Opening angle (-6 dB) | 48°/4000 Hz |
| Excursion limit | ±10 mm |
| Resonance frequency fs | 29 Hz (datasheet: 30 Hz) |
| Magnetic induction | 1.1 T |
| Magnetic flux | 600 µWb |
| Height of front pole-plate | 5 mm |
| Voice coil diameter | 35 mm |
| Height of winding | 12 mm |
| Cut-out | 184 mm |
| Net weight | 1.5 kg |
| D.C. resistance Rdc | 3.4 Ω |
| Mechanical Q factor Qms | 3.99 |
| Electrical Q factor Qes | 0.38 |
| Total Q factor Qts | 0.35 |
| Equivalent volume Vas | 65 l |
| Effective piston area Sd | 214 cm² |
| Dynamically moved mass Mms | 28 g |
| Force factor Bxl | 7.7 Tm |
| Inductance of the voice coil L | 1.5 mH |
| Terminals | 4.8 x 0.8 mm (+)/2.8 x 0.8 mm (-) |
Dimensions and drawings

Dimension drawing · Open original image
Installation and cabinet guidance
Allow a 184 mm cut-out for a frame that measures 232 mm across, with the fixing holes on a 218 mm circle for 5 mm screws; mark the hole positions from the driver itself before drilling. Behind the baffle allow about 88 mm of clear depth for the basket and its 100 mm magnet, with room beyond that for the terminals and the wiring.
Fit it to a rigid baffle with a continuous gasket or sealing strip between the frame and the panel, and tighten the fixings evenly and only enough to seal so the frame is not pulled out of shape. Check that the cone and the rubber surround stay clear of the grille and of any internal bracing. At 1.5 kg, and with an excursion limit of ±10 mm, it repays a braced baffle and a grille set well clear of the cone.
The terminals take 4.8 x 0.8 mm blades on the positive side and 2.8 x 0.8 mm on the negative, so blade size identifies polarity. Use matching push-on connectors, observe polarity, insulate the joints and keep the wiring clear of the moving parts, and choose an amplifier or crossover suited to the 4 Ω load.
Visaton's published enclosure suggestions for this driver: 15 l closed (fc 67 Hz, Qtc 0.8); 20 l bass reflex with one BR 19.24 port cut to 14 cm (fb 45 Hz); 30 l bass reflex with one BR 19.24 port cut to 11 cm (fb 39 Hz); 50 l bass reflex with one BR 15.34 port cut to 13 cm (fb 33 Hz).
Related Products
Part number 1301
Visaton AL 130 8 Ohm, 5 Inch, High-End Midrange Driver
Part number 1305
Visaton AL 130 M 8 Ohm, 5 Inch, High-End Midrange Driver
Part number 1302
Visaton AL 170 8 Ohm, 6.5 Inch, High-End Midrange Driver
Part number 1281
Visaton AL 200 8 Ohm, 8 Inch, High-End Woofer
Part number 1263
Visaton B 100 6 Ohm, 4 Inch, High-End Full Range Speaker
Part number 1350
Visaton B 200 6 Ohm, 8 Inch, High-End Full Range Speaker
Part number 1261
Visaton B 80 8 Ohm, 3.3 Inch, High-End Full Range Speaker
Part number 2530
Visaton BF 30 R 4 Ohm, 1.2 Inch, Full Range Miniature Speaker
Part number 2243
Visaton BF 32 4 Ohm, 1.3 Inch, Full Range Miniature Speaker
Part number 2242
Visaton BF 32 8 Ohm, 1.3 Inch, Full Range Miniature Speaker
Part number 2249
Visaton BF 32 S 4 Ohm, 1.3 Inch, Full Range Speaker
Part number 2247