Visaton B 80 8 Ohm, 3.3 Inch, High-End Full Range Speaker
Product photo · Enlarge image
Product photo
Rear view and connections
Dimension drawing
Response and impedance
Directivity pattern
Product photographs and manufacturer drawings. Images are not to scale.
Quantity discounts
Buying in quantity?
Contact us with the quantity you need and we can discuss pricing for your order.
Request a quantity quoteDescription
The B 80 combines a coated paper cone, a rear-ventilated spider and a phase plug with a strong but light neodymium magnet, which together give a very even response with low distortion and low mechanical losses. This 8 Ω version handles 30 W rated power, gives 85 dB (1 W/1 m) and resonates at 110 Hz.
Typical applications
- Compact high-end shelf speakers
- Mid/high unit in high-end multi-way speakers
- High-end hi-fi systems
Full specifications
| Rated power | 30 W |
|---|---|
| Maximum power | 50 W |
| Nominal impedance | 8 Ω |
| Frequency response (−10 dB) | 80–20000 Hz |
| Mean sound pressure level | 85 dB (1 W/1 m) |
| Opening angle (-6 dB) | 119°/4000 Hz |
| Maximum linear displacement | 2.2 mm |
| Resonance frequency fs | 110 Hz |
| Magnetic induction | 1.17 T |
| Magnetic flux | 290 µWb |
| Height of front pole-plate | 3 mm |
| Voice coil diameter | 25.5 mm |
| Height of winding | 6.0 mm |
| Cut-out | 89 mm |
| Net weight | 0.30 kg |
| D.C. resistance Rdc | 6.6 Ω |
| Mechanical Q factor Qms | 6.53 |
| Electrical Q factor Qes | 0.69 |
| Total Q factor Qts | 0.63 |
| Equivalent volume Vas | 1.8 l |
| Effective piston area Sd | 38.5 cm² |
| Dynamically moved mass Mms | 2.8 g |
| Force factor Bxl | 4.15 Tm |
| Compliance Cm | 0.87 mm/N |
| Terminals | 5.2 x 0.5 mm (+)/2.8 x 0.5 mm (-) |
Dimensions and drawings

Dimension drawing · Open original image
Installation and cabinet guidance
Allow an 89 mm panel opening. The frame is 104 mm in diameter, with 4 mm fixing holes countersunk to 7 mm on a 95 mm circle; mark them from the driver itself rather than assuming the spacing. Behind the panel allow about 45.6 mm for the 87 mm basket and the 41 mm magnet, plus room for the terminals and the wiring.
Mount it on a rigid baffle with a continuous seal between the frame and the panel, tighten the fixings evenly and only enough to seal so the frame is not distorted, and keep the cone clear of any grille. Connect to the 5.2 x 0.5 mm (+)/2.8 x 0.5 mm (-) blade terminals with matching push-on connectors and observe polarity; the two blade widths identify it. These are narrow 0.5 mm blades, so fit push-on connectors made for that size rather than forcing a larger one on, and use an amplifier suitable for the 8 Ω load.
How low it plays depends on the enclosure volume and tuning, so test the driver in the intended enclosure at the intended listening level before finalising the cabinet. Linear travel is limited to 2.2 mm, so it will not take being driven hard at the bottom of its range.
Related Products
Part no. 1263
Visaton B 100 6 Ohm, 4 Inch, High-End Full Range Speaker
Part no. 1350
Visaton B 200 6 Ohm, 8 Inch, High-End Full Range Speaker
Part no. 2530
Visaton BF 30 R 4 Ohm, 1.2 Inch, Full Range Miniature Speaker
Part no. 2243
Visaton BF 32 4 Ohm, 1.3 Inch, Full Range Miniature Speaker
Part no. 2242
Visaton BF 32 8 Ohm, 1.3 Inch, Full Range Miniature Speaker
Part no. 2249
Visaton BF 32 S 4 Ohm, 1.3 Inch, Full Range Speaker
Part no. 2247
Visaton BF 32 S 8 Ohm, 1.3 Inch, Full Range Miniature Speaker
Part no. 2260
Visaton BF 37 4 Ohm, 1.5 Inch, Full Range Speaker
Part no. 2261
Visaton BF 37 8 Ohm, 1.5 Inch, Full Range Speaker
Part no. 2240
Visaton BF 45 4 Ohm, 1.8 Inch, Full Range Miniature Speaker
Part no. 2241